Pioneer PDP 424MV specifications Pin Assignments, Mini D-Sub 15-pin connector Analog

Page 35

Pin Assignments

English

Pin Assignments

mini D-Sub 15-pin connector (Analog)

			PC 1
	5		4	3	2	1
	10		9	8	7	6
	15	14		13	12	11
Pin No.			Signal (Analog)
1	Red
2	Green or sync-on-green
3	Blue
4	No connection
5	Ground
6	Red ground
7	Green ground
8	Blue ground
9	No connection
10	Sync signal ground
11	No connection
12	Bi-directional DATA (SDA)
13	Horizontal sync or Composite sync
14	Vertical sync
15	Data clock

DVI-D 24-pin connector (Digital)

The unit is equipped with a type of connector commonly used for digital.

(This cannot be used for an analog input.) (TMDS can be used for one link only.)

PC 3

1		2		3		4		5		6		7		8

9		10		11		12		13		14		15		16

17		18		19		20		21		22		23		24

Pin No.	Signal (Digital)
1	T.M.D.S Data 2 -
2	T.M.D.S Data 2 +
3	T.M.D.S Data 2 Shield
4	No connection
5	No connection
6	DDC Clock
7	DDC Data
8	No connection
9	T.M.D.S Data 1 -

10	T.M.D.S Data 1 +
11	T.M.D.S Data 1 Shield

12	No connection
13	No connection
14	+5V Power
15	Ground
16	Hot Plug Detect
17	T.M.D.S Data 0 -
18	T.M.D.S Data 0 +
19	T.M.D.S Data 0 Shield
20	No connection
21	No connection
22	T.M.D.S Clock Shield
23	T.M.D.S Clock +
24	T.M.D.S Clock -

28

En

Image 35

Contents PDP-424MV Operating Instructions Risk of Electric Shock Do not Open PrecautionsImportant Information Recommendations to avoid or minimize phosphor burn-in Plasma monitor cleaning procedureTo avoid damage and prolong operating life Declaration of Conformity Important Safety Instructions S021EF Contents Ventilation Requirements for enclosure mounting InstallationClamp Video signal PC/COMPONENT signalCreating a video wall Cable ManagementHandling the remote control How to use the remote controlBattery Installation and Replacement Using the wired remote control modeFront View Turns the monitor’s power on and offReceives the signals from the remote control Part Names and FunctionRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discsSize screen 43 or Sxga Screen Size Operation with Computer SignalsWhen wide signals are input Supported resolutionMenu Operations Setting the language for the menus Advanced menu mode Language settingsMenu Tree Reset Restoring the factory default settings Reducing noise in the picture Picture Settings MenuAdjusting the picture Setting the color temperatureChanging the Gamma Curve Adjusting the color to the desired levelMaking the Low Tone adjustments Adjusting the colorsAdjusting the Position, Size, PHASE, Clock Sound Settings MenuScreen Settings Menu Setting the allocation of the audio connectorsChecking the signal being transmitted to PC1 terminal Option1 Settings MenuSetting the on-screen display Setting the PC2/COMPONENT2 connectors Input Skip settings Setting high definition images to the suitable screen sizeSetting the Input Skip Resetting to the default valuesSetting the picture to suit the movie Option2 Settings MenuSetting the power management for computer images STANDBY/ON indicator Setting the time Orbiter settings Orbiter Function settings Inverse SettingsScreen Wiper Setting the gray level for the Side Mask Soft Focus settings Side Mask settingsUsing the timer Option3 Settings MenuSetting the screen size for S1/S2 video input Setting the signal and black level for DVI signalEnabling/disabling the front panel controls Setting the power on modeVideo Wall setting Enabling/disabling remote control wireless transmissionLoop Out setting ID number setting Auto ID settings Divider settings Video Wall Position settings DISP. Mode settingsScreen Screen settings ABL Link settings P. on Delay settingsSetting the video signal format Advanced OSD Settings MenuColor System Settings Menu Setting the menu modePin Assignments Mini D-Sub 15-pin connector AnalogDVI-D 24-pin connector Digital Computer input signals supported by this system Table of Signals SupportedSupported resolution English Symptom Checks Remedy TroubleshootingSignals Specifications