Pioneer PDP 424MV Screen Size Operation with Computer Signals, Size screen 43 or Sxga

Page 17

English

WIDE Operations

SCREEN SIZE Operation with Computer Signals

Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen.

1.Press the SCREEN SIZE button on the remote control.

2.Within 3 seconds ...

Press the SCREEN SIZE button again. The screen size switches as follows:

→ 4:3 → FULL → ZOOM

4:3 size screen (4:3 or SXGA 5:4)

The picture has the same size as the normal computer image.

FULL size screen

The image is expanded in the horizontal direction.

ZOOM size screen

When wide signals are input.

FULL size screen

Information

Supported resolution

See page 29 for details on the display output of the various VESA signal standards supported by the monitor.

When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put

Select an appropriate setting for RGB SELECT mode referring to the“Table of Signals Supported” on page 29.

*“VGA”, “SVGA” and “SXGA” are registered trademarks of IBM, Inc. of the United States.

Note:

Do not allow the displayed in 4:3 mode or 14:9 mode for an extended period. This can cause a phosphor burn-in.

10

En

Image 17

Contents PDP-424MV Operating Instructions Risk of Electric Shock Do not Open PrecautionsImportant Information Recommendations to avoid or minimize phosphor burn-in Plasma monitor cleaning procedureTo avoid damage and prolong operating life Declaration of Conformity Important Safety Instructions S021EF Contents Ventilation Requirements for enclosure mounting InstallationCreating a video wall Video signal PC/COMPONENT signalCable Management ClampBattery Installation and Replacement How to use the remote controlUsing the wired remote control mode Handling the remote controlReceives the signals from the remote control Turns the monitor’s power on and offPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discsWhen wide signals are input Screen Size Operation with Computer Signals Supported resolution Size screen 43 or Sxga Advanced menu mode Setting the language for the menus Language settings Menu OperationsMenu Tree Reset Restoring the factory default settings Adjusting the picture Picture Settings MenuSetting the color temperature Reducing noise in the pictureMaking the Low Tone adjustments Adjusting the color to the desired levelAdjusting the colors Changing the Gamma CurveScreen Settings Menu Sound Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, PHASE, ClockSetting the on-screen display Option1 Settings MenuSetting the PC2/COMPONENT2 connectors Checking the signal being transmitted to PC1 terminalSetting the Input Skip Setting high definition images to the suitable screen sizeResetting to the default values Input Skip settingsSetting the power management for computer images Option2 Settings MenuSTANDBY/ON indicator Setting the picture to suit the movie Orbiter Function settings Orbiter settings Inverse Settings Setting the time Soft Focus settings Setting the gray level for the Side Mask Side Mask settings Screen WiperSetting the screen size for S1/S2 video input Option3 Settings MenuSetting the signal and black level for DVI signal Using the timerEnabling/disabling the front panel controls Setting the power on modeLoop Out setting Enabling/disabling remote control wireless transmissionID number setting Video Wall setting Video Wall Position settings Divider settings DISP. Mode settings Auto ID settings ABL Link settings Screen settings P. on Delay settings ScreenColor System Settings Menu Advanced OSD Settings MenuSetting the menu mode Setting the video signal formatPin Assignments Mini D-Sub 15-pin connector AnalogDVI-D 24-pin connector Digital Computer input signals supported by this system Table of Signals SupportedSupported resolution English Symptom Checks Remedy TroubleshootingSignals Specifications