Basic Operations
English
POWER
To turn the unit ON and OFF:
1.Plug the power cord into an active AC power outlet.
2.Press the Power button (on the unit).
The monitor’s STANDBY/ON indicator turns red and the standby mode is set.
3.Press the POWER ON button (on the remote control) to turn on the unit.
The monitor’s STANDBY/ON indicator will light up (green) when the unit is on.
4.Press the POWER STANDBYbutton (on the remote control) or the Power button (on the unit) to turn off the unit.
The monitor’s STANDBY/ON indicator turns red and the standby mode is set (only when turning off the unit with the remote control).
VOLUME
To adjust the sound volume:
1.Press and hold the VOLUME 
button (on the remote control or the unit) to increase to the desired level.
2.Press and hold the VOLUME 
button (on the remote control or the unit) to decrease to the desired level.
MUTING
To mute the sound:
Press the MUTING button on the remote control to mute the sound; press again to restore.
OFF TIMER
To set the off timer:
The off timer can be set to turn the power off after 30, 60, 90 or 120 minutes.
1.Press the OFF TIMER button to start the timer at 30 minutes.
2.Press the OFF TIMER button to the desired time.
3.The timer starts when the menu turns off.
→ 30 → 60 → 90 → 120 → 0
OFF TIMER 30
To check the remaining time:
1.Once the off timer has been set, press the OFF TIMER button once.
2.The remaining time is displayed, then turns off after a few seconds.
3.When five minutes remain the remaining time appears until it reaches zero.
DISPLAY | OFF TIMER 28 |
|
To check the settings:
1.The screen changes each time the DISPLAY button is pressed.
2.If the button is not pressed for approximately three seconds, the menu turns off.
Basic Operations
8
DIGITAL ZOOM
Digital zoom specifies the picture position and enlarges the picture.
1.Press the POINT ZOOM button to display the pointer.
(
)
To change the size of the picture:
Press the ZOOM+ button and enlarge the picture.
The pointer will change to resemble a magnifying glass. (
)
A press of the ZOOM- button will reduce the picture and return it to its original size.
To change the picture position:
Select the position with the ▲▼ buttons.
2.Press the POINT ZOOM button to delete the pointer.
AUTO SET UP
To adjust the size or quality of the picture automatically:
Press the AUTO SET UP button.
Information
AUTO SET UP ON setting
When RGB (still picture) input is selected: PHASE, CLOCK, Position, and Contrast will be adjusted automatically.
When RGB (motion picture), VIDEO, or Y/Pb/Pr (component) input is selected:
The screen size switches to ZOOM mode automatically with the superimposed caption displayed fully only when the picture contains dark areas above and below the picture.
To cancel the off timer:
1.Press the OFF TIMER button twice in a row.
2.The off timer is canceled.
OFF TIMER 0
Note:
After the power is turned off with the off timer ...
A slight current is still supplied to the monitor. When you are leaving the room or do not plan to use the system for a long period of time, turn off the power of the monitor.
En