Option2 Settings Menu
Setting the power management for computer images
This
Example: Turning the power management function on
Set “ADVANCED OSD” to “ON” in the main menu (1/ 2), then perform the following operations.
On “PWR. MGT.” of “OPTION2” menu, select “ON”.
|
|
|
| OPTION2 |
| 2 / 3 |
|
| PREVIOUS PAGE |
|
| ||
|
|
|
| |||
| PWR. MGT. |
|
| : | ON | |
| PURECINEMA |
| : | ON | ||
| LONG LIFE |
|
|
| ||
| SIDE MASK |
| : | 3 | ||
| S1/S2 |
| : | OFF | ||
| DVI |
|
|
| ||
|
| NEXT PAGE |
| EXIT RETURN | ||
|
| SEL. | ADJ. | |||
|
|
|
|
|
|
|
Information
Power management function
*The power management function automatically reduces the monitor’s power consumption if the computer’s keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer.
*If the computer’s power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state.
*For instructions on using the computer’s power management function, refer to the computer’s operating instructions.
Power management settings
ON: In this mode the power management function is turned on.
OFF: In this mode the power management function is turned off.
Power management function and STANDBY/ ON indicator
The STANDBY/ON indicator indicates the status of the power management function. See below for indicator status and description.
STANDBY/ON indicator
Power | STANDBY/ | Power | Description | Turning the picture |
management | ON indicator | management |
| back on |
mode |
| operating status |
|
|
|
|
|
|
|
On | Green | Not activated. | Horizontal and vertical | Picture already on. |
|
|
| synchronizing signals |
|
|
|
| are present from the |
|
|
|
| computer. |
|
|
|
|
|
|
Off | Red | Activated. | Horizontal and/or | Operate the keyboard or |
|
|
| vertical synchronizing | mouse. The picture |
|
|
| signals are not sent | reappears. |
|
|
| from the computer. |
|
|
|
|
|
|
Setting the picture to suit the movie
The film image is automatically discriminated and projected in an image mode suited to the picture. [NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the “PURECINEMA” to “OFF”
Set “ADVANCED OSD” to “ON” in the main menu (1/ 2), then perform the following operations.
On “PURECINEMA” of “OPTION2” menu, select “OFF”.
|
|
|
| OPTION2 |
| 2 / 3 |
|
| PREVIOUS PAGE |
|
| ||
|
|
|
| |||
| PWR. MGT. |
| : | OFF | ||
| PURECINEMA |
|
| : | OFF | |
| LONG LIFE |
|
|
| ||
| SIDE MASK |
| : | 3 | ||
| S1/S2 |
| : | OFF | ||
| DVI |
|
|
| ||
|
| NEXT PAGE |
| EXIT RETURN | ||
|
| SEL. | ADJ. | |||
|
|
|
|
|
|
|
Information
PURECINEMA
ON: Automatic discrimination of the image and projection in PURECINEMA.
OFF: PURECINEMA does not function.
Reducing burn-in of the screen
The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce
Set “ADVANCED OSD” to “ON” in the main menu (1/ 2), then perform the following operations.
On “OPTION2” menu, select “LONG LIFE”, then press the MENU/SET button.
The “LONG LIFE” screen appears.
|
|
| LONG LIFE |
| |
| ABL |
|
| : | AUTO |
| ORBITER |
| : | OFF | |
| INVERSE |
| : | OFF | |
| SCREEN WIPER |
| : | OFF | |
| SOFT FOCUS |
| : | OFF | |
| SEL. | ADJ. | EXIT RETURN | ||
|
|
|
|
|
|
ABL (Auto Brightness Limiter)
Use this to activate the brightness limiter.
Example: Setting “ABL” to “LOCK1”
On “ABL” of “LONG LIFE” menu, select “LOCK1”.
|
|
| LONG LIFE |
| |
| ABL |
|
| : | LOCK1 |
| ORBITER |
| : | OFF | |
| INVERSE |
| : | OFF | |
| SCREEN WIPER |
| : | OFF | |
| SOFT FOCUS |
| : | OFF | |
| SEL. | ADJ. | EXIT RETURN | ||
|
|
|
|
|
|
Information
ABL settings
AUTO: The brightness of the screen is adjusted automatically to suit the picture quality.
LOCK1, 2, 3: Sets maximum brightness.
The brightness level decreases in the order of LOCK 1, 2, 3. LOCK 3 provides minimum brightness.
English
OSD (On Screen Display) Controls
19
En