Pioneer PDP 424MV specifications Specifications, Signals

Page 39

Specifications

English

Specifications

Screen Size

36.3"(H)20.4"(V) inches

 

 

921(H)518(V) mm

 

 

diagonal 42"

 

 

 

Aspect Ratio

16 : 9

Resolution

853(H)480(V) pixels

Signals

Synchronization Range Horizontal : 15.5 to 110 kHz

 

(automatic : step scan)

 

Vertical : 50.0 to 120 Hz

 

(automatic : step scan)

 

 

Input Signals

RGB, NTSC (3.58/4.43), PAL (B,G,M,N),

 

PAL60, SECAM, HD*1 , DVD*1 , DTV*1

Input Terminals (VIDEO1 and PC1 can also be used as OUTPUT terminals)

 

 

PC

 

 

 

Visual 1 (Analog)

mini D-sub 15-pin1

 

 

Visual 2 (Analog)

BNC (R, G, B, H/CS, V)1*2

 

 

Visual 3 (Digital)

DVI-D 24-pin1*3

 

 

Video

 

 

 

Visual 1

BNC1

 

 

Visual 2

RCA-pin1

 

 

Visual 3

S-Video: DIN 4-pin1

 

 

COMPONENT

 

 

 

Visual 1

RCA-pin (Y, PB[CB], PR[CR])1*1

 

 

Visual 2

BNC (Y, PB[CB], PR[CR])1*1, *2

 

 

Audio

Stereo RCA3 (Selectable)

 

 

RS-232C

D-sub 9-pin1

 

Sound output

8W+8W at 6 ohm

Power Supply

AC100-240V 50/60Hz

Current Rating

4.5A (maximum)

Power Consumption

270W (standby 0.9W)

Dimensions

40 (W)24 (H)3.5 (D) inches

 

 

 

1018 (W)610 (H)89 (D) mm

 

 

 

Weight

62.8 lbs / 28.5 kg (without stand)

Environmental Considerations

 

 

 

Operating Temperature

0°C to 40°C / 32°F to 104°F

Other Features Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zoom Function (100-900% Selectable), Video Wall 4-25 multi screen, Self Diagnosis, Image Burn reduction tools (ABL LOCK1~3, INVERSE, WHITE, ORBITER (Auto1,2/Manual), SCREEN WIPER), Color Temperature select (high/mid/mid low/low, user has 4 memories), Key lock (Except power SW), Auto Picture, Input Skip, Color Detail Adjustment, Low Tone (3 mode), Auto ID, Programmable Timer, Gamma Correction

(4 mode), Loop through interface, Plug and play (DDC1, DDC2b, PC3: DDC2b only)

 

35

54

1018 (40")

(1.38")

 

 

(2.13")

 

610 (24")

 

 

 

89

 

 

(3.5")

 

Units are in mm

 

 

(inch)

The features and specifications may be subject to change without notice.

*1HD/DVD/DTV input signals supported on this system

480P (60 Hz)

480I (60 Hz)

525P (60 Hz)

525I (60 Hz)

576P (50 Hz)

576I (50 Hz)

625P (50 Hz)

625I (50 Hz)

720P (60 Hz)

1035I (60 Hz)

1080I (50 Hz)

1080I (60 Hz)

*2The 5-BNC connectors are used as PC2 and

COMPONENT2 input. Select one of them under “BNC INPUT”.

*3Compatable with HDCP.

Supported Signals

• 640 480P @ 59.94/60Hz

• 1920 1080I @ 50Hz

• 1280

720P @ 59.94/60Hz

• 720 576P @ 50Hz

• 1920

1080I @ 59.94/60Hz

• 1440 (720) 576I @ 50Hz

•720 480P @ 59.94/60Hz

•1440 (720) 480I @ 59.94/60Hz

Note: In some cases a signal on the plasma monitor may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

32

En

Page 38 Page 39
Image 39
Page 38 Page 39
Contents PDP-424MV Operating Instructions Precautions Important InformationRisk of Electric Shock Do not Open Plasma monitor cleaning procedure To avoid damage and prolong operating lifeRecommendations to avoid or minimize phosphor burn-in Declaration of Conformity Important Safety Instructions S021EF Contents Ventilation Requirements for enclosure mounting InstallationClamp Video signal PC/COMPONENT signalCreating a video wall Cable ManagementHandling the remote control How to use the remote controlBattery Installation and Replacement Using the wired remote control modeFront View Turns the monitor’s power on and offReceives the signals from the remote control Part Names and FunctionRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discsSize screen 43 or Sxga Screen Size Operation with Computer SignalsWhen wide signals are input  Supported resolutionMenu Operations Setting the language for the menus Advanced menu mode  Language settingsMenu Tree Reset Restoring the factory default settings Reducing noise in the picture Picture Settings MenuAdjusting the picture Setting the color temperatureChanging the Gamma Curve Adjusting the color to the desired levelMaking the Low Tone adjustments Adjusting the colorsAdjusting the Position, Size, PHASE, Clock Sound Settings MenuScreen Settings Menu Setting the allocation of the audio connectorsChecking the signal being transmitted to PC1 terminal Option1 Settings MenuSetting the on-screen display Setting the PC2/COMPONENT2 connectors Input Skip settings Setting high definition images to the suitable screen sizeSetting the Input Skip Resetting to the default valuesSetting the picture to suit the movie Option2 Settings MenuSetting the power management for computer images STANDBY/ON indicator Setting the time  Orbiter settings Orbiter Function settings  Inverse SettingsScreen Wiper Setting the gray level for the Side Mask Soft Focus settings  Side Mask settingsUsing the timer Option3 Settings MenuSetting the screen size for S1/S2 video input Setting the signal and black level for DVI signalEnabling/disabling the front panel controls Setting the power on modeVideo Wall setting Enabling/disabling remote control wireless transmissionLoop Out setting ID number setting Auto ID settings  Divider settings Video Wall Position settings  DISP. Mode settingsScreen  Screen settings ABL Link settings  P. on Delay settingsSetting the video signal format Advanced OSD Settings MenuColor System Settings Menu Setting the menu modeMini D-Sub 15-pin connector Analog DVI-D 24-pin connector DigitalPin Assignments Table of Signals Supported Supported resolution Computer input signals supported by this system English Symptom Checks Remedy TroubleshootingSignals Specifications
Top Page Image Contents