Remote Control
qPOWER ON/STANDBY Switches the power on/standby.
(This does not operate when STANDBY/ON indicator of the main unit is off.)
wRGB/PC
Press this button to select RGB/PC as the source. RGB/PC can also be selected using the INPUT/EXIT button on the monitor.
eCOMPONENT
Press this button to select COMPONENT as the source. COMPONENT can also be selected using the INPUT/ EXIT button on the monitor.
rVIDEO
Press this button to select VIDEO as the source.
→VIDEO1 → VIDEO2 → VIDEO3
VIDEO can also be selected using the INPUT/EXIT button on the monitor.
tMENU/SET
Press this button to access the OSD controls.
Press this button during the display of the main menu to go to the sub menu.
yCURSOR (▲ / ▼ / / )
Use these buttons to select items or settings and to adjust settings.
uEXIT
Press this button to exit the OSD controls in the main menu. Press this button during the display of the sub menu to return to the previous menu.
iPOINT ZOOM
Press this button to display the pointer.
oZOOM
Enlarges or reduces the image.
!0VOLUME
Adjusts the sound volume.
!1MUTING
Mutes the sound.
!2SCREEN SIZE
Automatically detects the signal and sets the aspect ratio. SCREEN SIZE button is not active for all signals.
!3DISPLAY
Displays the source settings on the screen.
!4OFF TIMER
Activates the off timer for the unit.
!5AUTO SET UP
Press this button to adjust PHASE, CLOCK, Position, and Contrast automatically, or to switch the screen size to ZOOM mode automatically with the superimposed caption displayed fully only when the picture contains dark areas above and below the picture.
!6ID NO. SET
Set the ID number in the remote control. The remote control can then be used only for a display with the same ID number. When several displays are used together they can be controlled individually.
!7CLEAR
Clears the number set by the ID NO. SET button.
!8Remote control signal transmitter
Transmits the remote control signals.
!9Remote Jack
Insert the plug of the remote cable (The 1/8 Stereo Mini cable) here when using the supplied remote control in the wired condition.
English
Part Names and Function
7
En