Pioneer PDP-6100HD manual Cable Management, How to use the remote control, Operating Range

Cable Management

Using the cable clamps provided with the plasma display, bundle at the back of the unit the signal and audio cables connected to the display.

Back of the unit

mounting holes

To attach

1. 2.

clamp

cables mounting hole

To detach

Operating Range

*Use the remote control within a distance of about 7 m/ 23ft. from the front of the monitor’s remote control sensor and at horizontal and vertical angles of up to approximately 30°.

*The remote control operation may not function if the monitor’s remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an obstacle between the sensor and the remote control.

English

How to use the remote control

Battery Installation and Replacement

Insert the 2 “AAA” batteries, making sure to set them in with the proper polarity.

1. Press and open the cover.

2.Align the batteries according to the (+) and (–) indication inside the case.

3.Replace the cover.

Handling the remote control

•Do not drop or mishandle the remote control.

•Do not get the remote control wet. If the remote control gets wet, wipe it dry immediately.

•Avoid heat and humidity.

•When not using the remote control for a long period, remove the batteries.

•Do not use new and old batteries together, or use different types together.

•Do not take apart the batteries, heat them, or throw them into a fire.

•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country/area.

Installation

3

En