Adjusting the pedestal level black level

Adjusting the pedestal level (black level)

This feature adjusts the video black level in a video image.

Example: Setting “3.75”

On “SET UP LEVEL” of “PICTURE” menu, select “3.75”.

P I C T U R E

PICTURE MEMORY : OFF

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

Setting the picture to suit the movie

The film image is automatically discriminated and projected in an image mode suited to the picture. [NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 1035I (60Hz), 1080I (60Hz) only]

Example: Setting the “PURECINEMA” to “OFF”

On “PURECINEMA” of “PICTURE” menu, select “OFF”.

PICTURE

English

TINT		R		G
DNR		:	LOW
COLOR TEMP.		:	MIDDLE
GAMMA		:	2 . 1
LOW TONE		: AUTO
SET UP LEVEL		:	3 . 75
COLOR MGT
PURECINEMA		: ON
AV SELECTION		: DYNAMIC
SEL.	ADJ.	EXIT RETURN

Information

SET UP LEVEL settings

0: Normal status

PICTURE MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR

TINT

DNR

COLOR TEMP. GAMMA LOW TONE SET UP LEVEL COLOR MGT PURECINEMA AV SELECTION

SEL. ADJ.

: OFF

R			G

:LOW

:MIDDLE

:2 . 1

:AUTO

: OFF

:DYNAMIC EXIT RETURN

3.75: 3.75% lower than normal

7.5: 7.5% lower than normal

Adjusting the colors

Use this procedure to adjust hue and color density for red, green, blue, yellow, magenta and cyan.

You can accentuate the green color of trees, the blue of the sky, etc.

Example: Adjusting the color management for blue

On “PICTURE” menu, select “COLOR MGT”, then press the MENU/SET button.

The “COLOR MGT” screen appears.

On “BLUE” of “COLOR MGT”, adjust the color management.

COLOR MGT

RED		Y	M
GREEN		C	Y

BLUE		M	C
YELLOW		G	R
MAGENTA		R	B
CYAN		B	G

RESET		: OFF
SEL.	ADJ.	EXIT RETURN

Information

COLOR MGT settings RED: Makes red’s adjustment GREEN: Makes green’s adjustment BLUE: Makes blue’s adjustment YELLOW: Makes yellow’s adjustment MAGENTA: Makes magenta’s adjustment CYAN: Makes cyan’s adjustment

RESET: Resets settings to the factory default value. Use and buttons to select “ON”, then press the MENU/SET button.

Information

PURECINEMA

ON: Automatic discrimination of the image and projection in PURECINEMA.

OFF: PURECINEMA does not function.

Setting the picture modes according to the brightness of the room

There are four picture modes that can be used effectively according to the environment in which you are viewing the display.

Example: Setting the “MOVIE1” mode

On “AV SELECTION” of “PICTURE” menu, select “MOVIE1”.

P I C T U R E

PICTURE MEMORY		: OFF
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT		R		G
TINT		R		G
DNR		:	LOW
COLOR TEMP.		:	MIDDLE		AV SELECTION : MOVIE1
GAMMA		:	2 . 1
LOW TONE		: AUTO
SET UP LEVEL		:	0
COLOR MGT
PURECINEMA		: ON
AV SELECTION		: DYNAMIC
SEL.	ADJ.	EXIT RETURN

Information

Types of AV SELECTION

MOVIE1, 2: Set this mode when watching video in a dark room.

This mode provides darker, finer pictures, like the screen in movie theaters.

For a darker image, select MOVIE2.

STANDARD: Set this mode when watching video in a bright room.

This mode provides pictures with distinct differences between light and dark sections.

DYNAMIC: This mode provides brighter pictures than

STANDARD.

DEFAULT: Use this to reset the picture to the factory default settings.

OSD (On Screen Display) Controls