Panasonic TU-HDS20 manual Digital 8VSB Cable/Analog Cable with DTV-Compatible TV, Not Included

GETTING STARTED

Step 3d. Digital 8VSB Cable/Analog Cable with DTV-Compatible TV

Follow this diagram if you have a DTV-compatible TV, cable service providing 8VSB digital cable, cable box and you want to receive digital cable channels through the HDTV Digital Receiver and analog cable channels through the cable box. Please take note that the HDTV Digital Receiver can receive 8 VSB as well as the unscrambled analog cable channels. Therefore, if you have no cable box, the 8VSB cable can be directly connected to the HDTV Digital Receiver.

Note: The HDTV Digital Receiver is able to receive DTV signals from your local cable provider only if they are transmitted in the 8VSB modulation format approved by the FCC for DTV transmission. Also, your cable provider may elect to transmit in the 8VSB format for only a limited period of time. Please contact your cable provider to determine if 8VSB modulation is available

	Optional Cable Box
	Optional Cable Box
	ANT			NOTE: ANTENNA, SPLITTER, CABLE BOX
	IN
	ANT			NOTE: ANTENNA, SPLITTER, CABLE
				AND RF CABLES NOT INCLUDED
	OUT			BOX, RF CABLES AND AUDIO CABLES
				NOT INCLUDED
	DTV-
	DTV-CompatibleTV
SPLITTER	AUDIO	PR	PB	Y
	R L	R	B	G
	INPUT

8VSB Signal

		ANT IN				HDTV DIGITAL RECEIVER
SATELLITE	RF OUT						®
IN	CHHDTV3	Digital Receiver				HDTV DIGITAL RECEIVER
ANT IN	CH 4		PR	PB	Y	WARNING	!
		R-AUDIO-L	R	B	G	RISK OF ELECTRIC SHOCK
MODEL NO.						DO NOT OPEN
SERIAL NO.							DISTRIBUTED BY
							MATSUSHITA ELECTRIC
		RGB/YPBPR					CORPORATION OF AMERICA
AC 120V 60Hz			R-AUDIO-L		VIDEO S-VIDEO		ONE PANASONIC WAY,
		H-SYNC-L				DIGITAL	SECAUCUS, NEW JERSEY 07094
MAXAMPS
MANUFACTURED		DIGITAL OUTPUT		NTSC OUTPUT		AUDIOOUT TEL LINE
						(AC-3)	ASSEMBLED IN MEXICO

DIGITAL 8VSB CABLE/ANALOG CABLE RECEPTION WITH

DTV-COMPATIBLE TV SETUP

Procedure

•Connect the cable from the wall jack to the splitter using a standard RF cable with coaxial connectors.

•Connect one splitter output to the HDTV Digital Receiver ANT IN jack using a RF cable.

•If using a cable box, connect the other splitter output to the cable box ANT (antenna) IN jack using a RF cable. Connect the cable box ANT (antenna) OUT jack to the DTV- compatible TV ANT (antenna) IN jack using a RF cable.

•If not using a cable box, connect the 8VSB cable directly to the HDTV Digital Receiver.

•Follow directions in Getting Started section to connect the HDTV Digital Receiver to a DTV- compatible TV.

35