Symptom
The ACTION button is not responding
No key operation (by the unit and/or the remote control) is effective.
No key operation is effective. OSD reads: “Searching for Satellite Signal.
Timer does not work
TROUBLESHOOTING
Remedy
•Make sure to press ACTION in the middle of the button. •Make sure the remote control is in STB or TV mode.
Set the POWER button to OFF and then back to ON. Alternatively, turn off the power, disconnect the power plug and then reconnect it. (The HDTV Digital Receiver may not be operating properly due to lightning, static electricity or some other external factor).
ODU (Satellite Dish) is momentarily disconnected from the digital receiver. Alternatively, turn off the power, disconnect the power plug and then reconnect it. (The HDTV Digital Receiver or the satellite dish antenna may not be operating properly due to lightning, static electricity or some other external factor).
•Check that the AC power plug is securely plugged into the power outlet. •Check that equipment is connected properly.
•Make sure remote control is in VCR mode.
•Check that the AC power plug is securely plugged into the power outlet. •Check that equipment is connected properly.
•Make sure the clock is set.
•Check to see whether the timers have overlapping times programmed. •Check if the timer did not reset to default settings (antenna/cable mode was changed).
Product Service
Do not attempt to remove the cover or repair the unit yourself. Refer servicing to qualified personnel only.
Product Information
For product service, product information or assistance with product operation, consult your dealer or call
If you ship the product
Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a
For service assistance, please call:
97