ROLLER GUIDE MENU OPERATIONS
Options : Clock
The clock option allows you to configure the system clock. When connected to DIRECTV service, you can set the DST ( daylight savings time), Time Zone and reset the time to what is current in the smart card. In the case, where the ATSC/NTSC is active, you can set DST and Time Zone. If only NTSC signals are being received, you can enter Day and Time. Following three screens depict the different clock options.
Audio | Audio |
Caption | Caption |
Clock | Time: | Wed 3/24 2:00 PM | Clock | Time: | Wed 3/24 2:00 PM |
Sat/Loc Mode | DST | Observed | Sat/Loc Mode | DST | Observed |
Favorites | Time Zone | Eastern | Favorites | Time Zone | Eastern |
About | Reset Time | About |
Press K to change system clock settings .
Press K to change system clock settings .
DIRECTV Screen | ATSC / NTSC Screen |
Audio
Caption
Clock
Time: 
Wed
2:00 PM
Sat/Loc Mode 
Favorites
About
Press K to change system clock settings. 
Clock Screen : NTSC only
Procedure
HSelect OPTIONS from the Rollerguide.
HPress ACTION button to display the OPTIONS menu.
HPress FG buttons to highlight Clock. Clock
HPress K button to change the clock settings.
HPressK button to highlight DST.
HPress FG buttons to select Observed or Not Observed.
HPress ACTION button.
HPress G button to highlight Time Zone. Press K button to change and FG buttons to navigate the Time Zone settings.
HPress ACTION button .
HPress G button to highlight Reset Time.
HPress ACTION button to reset time.
HPressJbutton three times to exit Rollerguide.
89