GETTING STARTED
Step 6a. ACTION / Navigation Button
Press ACTION to select the Roller Guide Menu item. Press the 
or 
arrows to highlight sub menus. Press the 
arrow to select features. Press the 
or 
arrows
to scroll through options within a feature. Press the 
arrow to return to main menu items.
Remote ACTION / Navigation Button
ACTION
Note: Be careful to press ACTION in the middle of the button. If you do not press in the middle of the button, the arrow buttons may be activated.
Step 7. Antenna/Cable Mode
Select either Antenna or Cable mode, depending on the type of incoming signal you are using.
Procedure
HIn SET UP Menu, select Ant Input to choose either ANTENNA or Cable (IRC, HRC,STD etc.).
Note: To view digital cable channels, your cable operator must be transmitting them in 8VSB format, please contact your local cable operator.
HPress the ACTION button to save your selection.
HPress the 
arrow repeatedly to exit back to Roller Guide.
Note: Whenever the antenna or cable mode is changed, Timer will revert back to default settings.
38