Panasonic WJ-FS309, WJ-FS409, WJ-FS316, WJ-FS416 Record Output Setup Menu, Spot OUT, Title Display

1-3. BORDER

This item lets you select the color of the border that splits the multiscreen output pictures in a Multiscreen display.

1.Move the cursor to the BORDER parameter.

2.Select the desired mode or color by pressing the + or – button.

The initial factory setting for the border color is WHITE.

WHITE: White Border

GRAY: Gray Border

BLACK: Black Border

OFF: No border

1-4. QUAD SHIFT

This item lets you enable or disable the quad shift operation when the MULTISCREEN SELECT button is pressed on the front panel. Quad shift displays a picture series such as 1-2-3-4, 5-6-7-8, 9-10-11-12 or 13-14-15-16 on quad screens.(WJ-FS309/FS409 is only available 1-2-3-4 or 5-6- 7-8.)

1.Move the cursor to the QUAD SHIFT parameter.

2.Select ON or OFF by pressing the + or – button. The initial factory setting is OFF.

ON: Enables the quad shift operation.

OFF: Disables the quad shift operation.

1-5. SECRET VIEW

This item lets you select whether to have the channel selected for Spot output displayed as Multiscreen output.

1.Move the cursor to the SECRET VIEW parameter.

2.Select ON or OFF by pressing the + or – button. The initial factory setting is OFF.

OFF: Disables Secret View. The same picture as dis- played in Spot output is also displayed in Multi- screen output.

ON: Enables Secret View: The channel of Spot that is selected for SPOT OUTPUT, is displayed for black picture in MULTISCREEN OUTPUT.

In case of the Spot Sequence mode, corresponding picture is skipped.

2.SPOT OUT

2-1. TITLE DISP

This item lets you enable or disable the camera title display overlaid on the spot output picture.

1.Move the cursor to the TITLE DISP parameter.

2.Select ON or OFF by pressing the + or – button. The initial factory setting is ON.

ON: Enables display of the camera title.

OFF: Disables display of the camera title.

■Record Output Setup Menu

WJ-FS316 SETUP

ALARM SETUP

MONITOR OUTPUT SETUP

REC OUTPUT SETUP

SEQUENCE SETUP

SYSTEM SETUP

Move the cursor to REC OUTPUT SETUP on the SETUP menu, then press the SET button. The REC OUTPUT SETUP menu appears on the monitor screen as shown below.

REC OUTPUT SETUP

1. TITLE DISPLAY

This item lets you enable or disable recording of the cam- era title with the picture.

1.Move the cursor to the TITLE DISPLAY parameter.

2.Select either ON or OFF.

The initial factory setting is ON.

ON: Enables recording of the camera title with the pic- ture on the tape.

OFF: Disables recording of the camera title with the picture on the tape.