Panasonic WJ-FS316, WJ-FS409, WJ-FS309 manual Alarm Control Function, Alarm Input, Alarm Operation

Page 37

ALARM CONTROL FUNCTION

Alarm Input

The Video Multiplexer can handle the following alarms:

Interface Alarm

Alarm received from the ALARM/REMOTE connector. “ALARM” is displayed on the monitor screen.

Camera Switching Signal Loss Alarm

Alarm indicating that camera switching signal loss has occurred.

“SW LOSS” is displayed on the monitor screen.

Video Input Signal Loss Alarm

Alarm indicating that camera signal loss has occurred. “CHXX LOSS” is displayed on the monitor screen.

Alarm Operation

When an alarm is activated, the Multiplexer, the Record Output and Monitor Output perform as shown below.

Refer to the ALARM SETUP menu of the SETUP MENU on page 11 for settings.

WJ-FS309/FS409/WJ-FS316/FS416 Multiplexer

1. Front Panel Display

When an alarm is activated, the Alarm Indicator and the corresponding CAMERA SELECT button blink.

The Alarm Output signal is supplied to pin 9 of the ALARM/REMOTE connector for the programmed duration. The indicator lights up after the preset Auto Reset Time has elapsed or the Video Multiplexer has received the Alarm Recovery In signal from the VCR.

If another alarm is activated during output of the previous alarm, the later alarm is output for the programmed dura- tion.

2. Alarm Buzzer

The built-in buzzer beeps for the programmed duration. The buzzer stops beeping before that duration when the alarm is reset.

recorded with more fields than in normal recording if ALM - PRI is specified in the ALARM SETUP menu.

2. Alarm Only Mode

Only the picture of the channel receiving an alarm is recorded while other channels’ are ignored.

3. Group Mode

The pictures of channels assigned to an ALARM group are recorded with more fields than normal. Assignments are specified in the ALARM SETUP menu.

Spot Output

1. Alarm Display Mode

The camera title and “ALARM” display blink alternately on the monitor screen if the ALM DISPLAY is set to ON.

ALARM

2. Alarm Channel Monitor Mode

The picture of the channel where alarm is activated is dis- played on the monitor if Alarm SPT OUT MODE is set to SPOT. The picture displayed before alarm was activated will be restored after the alarm is reset. It remains on the monitor if Alarm SPT OUT MODE is set to OFF.

Multiscreen Output

1. Alarm Display Mode

The camera title and “ALARM” display blink alternately on the monitor screen if the ALM DISPLAY is set to ON.

Record Output

The pictures of channels where alarm is activated are recorded on the VCR in the mode specified for the ALM REC MODE parameter on the ALARM SETUP menu.

1. Alarm Priority Mode

The pictures of channels where alarm is activated are

ALARM

37

Image 37
Contents WJ-FS316 WJ-FS409 WJ-FS416 Lightning flash with arrowhead sym Contents Preface FeaturesSegment Screen Do not drop metallic parts through slots PrecautionsDo not attempt to disassemble the appliance Handle the appliance with careAlarm Reset Button Alarm Reset Power Switch Power ON/OFFAlarm Indicator Alarm WJ-FS316/FS416Sequence Button SEQ Spot/Multiscreen Selection ButtonIncrement/Decrement Buttons -, + 0Set Button SETRear View Displaying the Setup Menu Setup MenuSetup Menu ALM REC Mode Alarm Setup MenuDynamic REC ALM Display Auto ResetALM Output ALM BuzzerMLT OUT Mode Monitor Output Setup MenuSPT OUT Mode Multi OutputSpot OUT Record Output Setup MenuTitle Display REC Mode Sequence Setup MenuAuto Skip Step Assignment SEQ ModeMLT/SPT SEQ Setup System Setup MenuTitle Setup Spot OutputCAM SW Loss Title PosiPlayback Auto To erase a specific characterPWR on Multi PasswordPWR on Spot ON→Communication Setup SW Interval EncodeMounting in the Rack InstallationsBasic System Connection System ConnectionsVideo Multiplexer WJ-FS309/FS409 Connect the time lapse VCR as shown in the example below Connection with the Time Lapse VCRALARM/REMOTEDATA Camera GND Multi Connection with the WV-CU360 System Controller Connection with the MonitorsSpot ALARM/REMOTE ConnectorConnection with the Alarm Output Connection with the Alarm SensorsNC no Remote SW1 Connection with the Remote External SwitchesMonitoring the Camera Picture Operating ProceduresSpot Multiscreen SEQVCR CAM Multiscreen OUTStill Spot Picture Still Multiscreen Picture Multiscreen PictureMultiscreen Sequence Monitoring the Playback Picture Recording on the Time LapseSpot Playback Picture Still Spot Playback Picture Zoomed Spot Playback PictureStill Multiscreen Playback Picture Multiscreen Playback PicturePlayback Multiscreen Sequence Alarm Input Alarm Control FunctionAlarm Operation Manual Reset Alarm ResetAuto Reset External ResetCamera Switching Pulse Loss Display ALL ResetChannel Loss Alarm Other FunctionsData Format AppendixAscii Video Multiplexer to System ControllerAll camera channels in a multiscreen Standard Accessories SpecificationsPanasonic Canada Inc

WJ-FS409, WJ-FS316, WJ-FS416, WJ-FS309 specifications

Panasonic's WJ-FS309, WJ-FS416, WJ-FS316, and WJ-FS409 are robust digital video multiplexers designed to enhance surveillance systems. These models incorporate advanced technologies and features critical for effective video management, making them suitable for various applications, including retail security, transportation, and public safety.

The WJ-FS309 is known for its versatile functionality, allowing users to view and manage multiple camera feeds on a single display. It supports up to nine inputs, offering a compact solution for smaller installations. Its user-friendly interface simplifies operation, while features like real-time monitoring and on-screen display options enhance usability.

WJ-FS316 is an upgraded version, capable of accommodating 16 camera inputs. This model is equipped with a high-performance processor that ensures smooth video playback and rapid switching between feeds. It also features built-in motion detection, which alerts users to unusual activity, thereby increasing security effectiveness. Additionally, the WJ-FS316 supports a variety of output resolutions, providing flexibility for different display setups.

The WJ-FS409 stands out with its support for 4CIF resolution, ensuring high-quality video output essential for detailed surveillance. It also includes advanced video analysis capabilities, such as video motion detection and mask programming, which allow users to filter out unnecessary information, thus focusing on critical events. This feature is particularly useful in locations with high foot traffic, as it helps reduce the workload for security personnel.

The WJ-FS416 is a comprehensive solution that combines features from both the WJ-FS309 and WJ-FS409. It supports 16 channels and offers high-quality image processing, making it ideal for extensive surveillance systems. Its flexibility extends to network integration, allowing for seamless connectivity with existing security infrastructure. Users can remotely access camera feeds, creating a more dynamic monitoring experience.

Overall, these Panasonic models provide a robust and scalable approach to video surveillance. They incorporate essential technologies that streamline video management while ensuring high image quality and effective security monitoring. Through their thoughtful design and advanced features, the WJ-FS series underscores Panasonic's commitment to delivering reliable and innovative solutions for modern surveillance challenges.