Panasonic WJ-FS316, WJ-FS409, WJ-FS309 manual Precautions, Do not drop metallic parts through slots

Page 5

PRECAUTIONS

Refer all work related to the installation of this product to qualified service personnel or system installers.

Do not block the ventilation opening or slots on the cover.

To prevent the appliance temperature from rising, place the appliance at least 5 cm (2 inches) away from the wall.

Do not drop metallic parts through slots.

This could permanently damage the appliance. Turn the power off immediately and refer servicing to qualified service personnel.

Do not attempt to disassemble the appliance.

To prevent electric shock, do not remove screws or covers.

There are no user-serviceable parts inside. Refer main- tenance to qualified service personnel.

Handle the appliance with care.

Do not strike or shake, as this may damage the appli- ance.

Do not expose the appliance to water or moisture, nor try to operate it in wet areas.

Do take immediate action if the appliance becomes wet. Turn the power off and refer servicing to qualified service personnel. Moisture can damage the appliance and also cause electric shock.

Do not use strong or abrasive detergents when cleaning the appliance body.

Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently. Afterwards, wipe off the remained part of the detergent in it with a dry cloth.

Do not operate the appliance beyond its specified temperature, humidity or power source ratings.

Do not use the appliance in an extreme environment where high temperature or high humidity exists.

Use the appliance at temperatures within –10°C - +50°C (14°F - 122°F) and a humidity below 90 %.

The input power source for this appliance is 120 V AC 60 Hz.

5

Image 5 Contents
WJ-FS316 WJ-FS409 WJ-FS416 Lightning flash with arrowhead sym Contents Segment Screen FeaturesPreface Do not drop metallic parts through slots PrecautionsDo not attempt to disassemble the appliance Handle the appliance with careAlarm Reset Button Alarm Reset Power Switch Power ON/OFFAlarm Indicator Alarm WJ-FS316/FS416Sequence Button SEQ Spot/Multiscreen Selection ButtonIncrement/Decrement Buttons -, + 0Set Button SETRear View Displaying the Setup Menu Setup MenuSetup Menu Dynamic REC Alarm Setup MenuALM REC Mode ALM Display Auto ResetALM Output ALM BuzzerMLT OUT Mode Monitor Output Setup MenuSPT OUT Mode Multi OutputTitle Display Record Output Setup MenuSpot OUT Auto Skip Sequence Setup MenuREC Mode Step Assignment SEQ ModeMLT/SPT SEQ Setup System Setup MenuTitle Setup Spot OutputCAM SW Loss Title PosiPlayback Auto To erase a specific characterPWR on Multi PasswordPWR on Spot ON→Communication Setup SW Interval EncodeMounting in the Rack InstallationsVideo Multiplexer WJ-FS309/FS409 System ConnectionsBasic System Connection Connect the time lapse VCR as shown in the example below Connection with the Time Lapse VCRALARM/REMOTEDATA Camera GND Multi Connection with the WV-CU360 System Controller Connection with the MonitorsSpot ALARM/REMOTE ConnectorNC no Connection with the Alarm SensorsConnection with the Alarm Output Remote SW1 Connection with the Remote External SwitchesMonitoring the Camera Picture Operating ProceduresSpot Multiscreen SEQVCR CAM Multiscreen OUTStill Spot Picture Multiscreen Sequence Multiscreen PictureStill Multiscreen Picture Spot Playback Picture Recording on the Time LapseMonitoring the Playback Picture Still Spot Playback Picture Zoomed Spot Playback PicturePlayback Multiscreen Sequence Multiscreen Playback PictureStill Multiscreen Playback Picture Alarm Operation Alarm Control FunctionAlarm Input Manual Reset Alarm ResetAuto Reset External ResetCamera Switching Pulse Loss Display ALL ResetChannel Loss Alarm Other FunctionsData Format AppendixAscii Video Multiplexer to System ControllerAll camera channels in a multiscreen Standard Accessories SpecificationsPanasonic Canada Inc