3. Still Spot Picture
The following function is available in MULTISCREEN OUT picture only.
1.Repeat the procedures described above for Spot Picture.
2.Press the STILL button to freeze the displayed picture. The LED on the STILL button lights up, and the LED on the pressed CAMERA SELECT button starts to blink.
The camera title and “STILL” (both blinking) alternate in the display.
3.To cancel the still picture, press the STILL button again.
The LED on the STILL button goes off and the selected playback picture is displayed in spot mode.
STILL
STILL
4. Zoomed Spot Picture
The following function is available in MULTISCREEN OUT picture only.
1.Repeat the procedures described above for Spot Picture.
2.Press the
Note: The “+” sign disappears if no operation is per- formed within approx. 5 seconds. If the “+” sign dis- appeared, press the
3.Press the cursor buttons (C, D, A, B) to move the zoomed area within the picture.
4.Press the + button to zoom in, or – button to zoom out.
Notes:
•When the + button is pressed, the picture is zoomed twofold.
•The picture cannot be zoomed out to be smaller than the original size by pressing the – button.
5.To cancel this mode, press the
32