Panasonic WJ-FS416 manual Spot/Multiscreen Selection Button, Sequence Button SEQ, 0Set Button SET

Page 7

The 4A screen is a compressed picture of channels 1 through 4, the 4B of channels 5 through 8, the 4C of channels 9 through 12, and the 4D of channels 13 through 16. The 9-segment screen shows the pictures of channels 1 through 9 in a 3x3 pattern.

tSpot/Multiscreen Selection Button

(SPOT/MULTISCREEN)

This button is used to select either the Spot output or Multiscreen output.

ySequence Button (SEQ)

This button activates the sequence mode. In this mode, a series of camera pictures is displayed in succession on the monitor screen for the specified duration.

uCamera Selection Buttons (CAMERA SELECT) These buttons select the camera for live picture or pic- ture recorded on the tape. When the VCR is in playback mode and the LED on the VCR/CAM button is on, these buttons select the specified camera picture from the tape for display on the monitor. When the LED is off, the buttons select the live picture of the specified camera.

iCursor Buttons (C, D, A, B)

These buttons move the cursor in the SETUP MENU of the Video Multiplexer, or select an area for Electronic Zooming.

C: Downward

D: Upward

A: Left

B: Right

oIncrement/Decrement Buttons (–, +)

Electronic Zooming is operated with these buttons, Zoom In with the + button and Zoom Out with the but- ton. During the setup, these buttons are used to select parameters.

!0Set Button (SET)

This button executes the selected parameter in the setup menu, and opens a submenu for more detailed settings. Menu items having a submenu are identified by a return symbol at the end of the line.

!1Still Button (STILL)

This button selects either still or moving mode for dis- play on the multiscreen output monitor. Pressing a CAMERA SELECT button will display the correspond- ing picture either in still or moving mode. When a still picture is displayed, the LED lights. Pressing the button again restores the moving picture and turns off the LED. Note: Please note that the tape continues running while

the picture is stilled. You may sometimes have to rewind the tape to the desired position.

!2Electric Zoom Button (EL-ZOOM)

This button specifies the zooming area in the multi- screen output picture. Pressing this button displays the “+” sign representing the center of the area to be enlarged. While the “+” sign is displayed for 5 seconds, move the “+” sign with the cursor buttons to the desired position and press the Increment (+) button. The desig- nated area is enlarged.

To return to the normal picture press the Decrement (–) or the EL-ZOOMbutton.

!3MENU/ESC Button (MENU/ESC)

Pressing this button for 2 seconds or more opens the Setup Menu of the Video Multiplexer. If pressed for less than 1 second, it functions as the Escape button and returns you to the previous menu.

To close the Setup menu when the setup is completed, press the button for 2 seconds.

Notes:

Make sure to distinguish between 1-second and 2- second operation of this button.

Opening the Setup menu does not affect the recording signal (REC OUT) output from the rear panel.

!4VCR/Camera Selection Button (VCR/CAM)

This button selects either VCR playback or the camera picture for display on the monitor. At the same time, it disables or enables recording on the VCR, since the connected VCR performs only playback or recording at a time. The playback picture is displayed on the moni- tor if you start playing back the VCR while the LED (Green) is on. The camera picture is displayed on the monitor while the LED is off. The camera picture is recorded on the tape if you start the VCR recording.

Notes:

If PLAYBACK AUTO is set to ON in the setup, pressing this button is ignored, instead this button follows the VCR status automatically. VCR is select- ed while playing back, and CAMERA is selected during non-playback mode of the VCR.

There may be a delay of a few seconds after

switching this button between VCR and CAMERA when PLAYBACK AUTO is ON.

*The picture may be disturbed for a moment after switch between VCR and camera.

Blinking of the LED is a warning that the ID code is missing in the playback signal. This may happen when using certain VCR types. In this case, the playback picture goes straight to the monitor instead of through the Video Multiplexer. As a result, the playback picture will not be recognizable unless only a single channel is recorded throughout the tape.

Note: Do not press more than two buttons on the front panel simultaneously. This may cause malfunction.

7

Image 7
Contents WJ-FS316 WJ-FS409 WJ-FS416 Lightning flash with arrowhead sym Contents Preface FeaturesSegment Screen Handle the appliance with care PrecautionsDo not drop metallic parts through slots Do not attempt to disassemble the applianceWJ-FS316/FS416 Power Switch Power ON/OFFAlarm Reset Button Alarm Reset Alarm Indicator Alarm0Set Button SET Spot/Multiscreen Selection ButtonSequence Button SEQ Increment/Decrement Buttons -, +Rear View Displaying the Setup Menu Setup MenuSetup Menu ALM REC Mode Alarm Setup MenuDynamic REC ALM Buzzer Auto ResetALM Display ALM OutputMulti Output Monitor Output Setup MenuMLT OUT Mode SPT OUT ModeSpot OUT Record Output Setup MenuTitle Display REC Mode Sequence Setup MenuAuto Skip Step Assignment SEQ ModeSpot Output System Setup MenuMLT/SPT SEQ Setup Title SetupTo erase a specific character Title PosiCAM SW Loss Playback AutoON→ PasswordPWR on Multi PWR on SpotCommunication Setup SW Interval EncodeMounting in the Rack InstallationsBasic System Connection System ConnectionsVideo Multiplexer WJ-FS309/FS409 Connect the time lapse VCR as shown in the example below Connection with the Time Lapse VCRALARM/REMOTEDATA Camera GND Multi Connection with the WV-CU360 System Controller Connection with the MonitorsSpot ALARM/REMOTE ConnectorConnection with the Alarm Output Connection with the Alarm SensorsNC no Remote SW1 Connection with the Remote External SwitchesSEQ Operating ProceduresMonitoring the Camera Picture Spot MultiscreenVCR CAM Multiscreen OUTStill Spot Picture Still Multiscreen Picture Multiscreen PictureMultiscreen Sequence Monitoring the Playback Picture Recording on the Time LapseSpot Playback Picture Still Spot Playback Picture Zoomed Spot Playback PictureStill Multiscreen Playback Picture Multiscreen Playback PicturePlayback Multiscreen Sequence Alarm Input Alarm Control FunctionAlarm Operation External Reset Alarm ResetManual Reset Auto ResetOther Functions ALL ResetCamera Switching Pulse Loss Display Channel Loss AlarmVideo Multiplexer to System Controller AppendixData Format AsciiAll camera channels in a multiscreen Standard Accessories SpecificationsPanasonic Canada Inc

WJ-FS409, WJ-FS316, WJ-FS416, WJ-FS309 specifications

Panasonic's WJ-FS309, WJ-FS416, WJ-FS316, and WJ-FS409 are robust digital video multiplexers designed to enhance surveillance systems. These models incorporate advanced technologies and features critical for effective video management, making them suitable for various applications, including retail security, transportation, and public safety.

The WJ-FS309 is known for its versatile functionality, allowing users to view and manage multiple camera feeds on a single display. It supports up to nine inputs, offering a compact solution for smaller installations. Its user-friendly interface simplifies operation, while features like real-time monitoring and on-screen display options enhance usability.

WJ-FS316 is an upgraded version, capable of accommodating 16 camera inputs. This model is equipped with a high-performance processor that ensures smooth video playback and rapid switching between feeds. It also features built-in motion detection, which alerts users to unusual activity, thereby increasing security effectiveness. Additionally, the WJ-FS316 supports a variety of output resolutions, providing flexibility for different display setups.

The WJ-FS409 stands out with its support for 4CIF resolution, ensuring high-quality video output essential for detailed surveillance. It also includes advanced video analysis capabilities, such as video motion detection and mask programming, which allow users to filter out unnecessary information, thus focusing on critical events. This feature is particularly useful in locations with high foot traffic, as it helps reduce the workload for security personnel.

The WJ-FS416 is a comprehensive solution that combines features from both the WJ-FS309 and WJ-FS409. It supports 16 channels and offers high-quality image processing, making it ideal for extensive surveillance systems. Its flexibility extends to network integration, allowing for seamless connectivity with existing security infrastructure. Users can remotely access camera feeds, creating a more dynamic monitoring experience.

Overall, these Panasonic models provide a robust and scalable approach to video surveillance. They incorporate essential technologies that streamline video management while ensuring high image quality and effective security monitoring. Through their thoughtful design and advanced features, the WJ-FS series underscores Panasonic's commitment to delivering reliable and innovative solutions for modern surveillance challenges.