OTHER FEATURES ON YOUR VCR
CHILD LOCK
You can lock your VCR with this feature. It will work even when the VCR is in STANDBY, preventing children from operating the VCR.
TO ENGAGE CHILD LOCK
Press and hold the CHILD LOCK 
button on the remote control for about 2 seconds. 
flashes and then 
remains lit on the VCR display confirming that CHILD LOCK has been activated.
Regardless of what other operating buttons are touched, the VCR will continue to operate in its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end, the VCR will automatically rewind the tape, eject it, and turn the power off.
TO DISENGAGE CHILD LOCK
Press and hold the CHILD LOCK 
button for about 2 seconds. 
starts flashing and then disappears. CHILD LOCK is disengaged.
NOTES:
•If you attempt to change modes by pressing another button while CHILD LOCK is on,
the 
indicator will flash on the VCR display.
•If power is interrupted for more than 60 seconds (due to power failure etc), CHILD LOCK may disengage.
www.sharp.co.uk/support
33