CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL CONTINUED
7.Press [
/
]to select CHANNEL.
8.Press [
/
] to start tuning in either direction. Tuning will stop when a channel is
received. If it is not the desired channel, press [
/
] to continue tuning.
9.Press [
/
] to select FINE TUNING. Press and hold [
/
] until the sharpest colour picture is obtained.
IMPORTANT NOTE:
10.Press [
/
] to select DECODER. This is preset to OFF. If you connect a satellite
receiver into VCR L2, as shown previously, leave decoder OFF. If you connect a
decoder, as shown previously, you must
use [
/
] to turn the decoder function ON. Refer to DECODER SWITCHING
OPERATION.
11.Press [
/
] to select SKIP then [
/
] to select ON or OFF.
The SKIP function determines whether the channel can be selected when using the
VCR CHANNEL 
/ 
buttons
instead of the NUMBER BUTTONS.
SET
12.Press SET 
to store this channel. The VCR will increment to the next channel up.
MENU
SET
MENU SELECT
BUTTONS
REMOTE CONTROL
VIDEO
Plus+
1 2 3
www.sharp.co.uk/support
35