INSTALLING YOUR VCR
AUTO TUNING
PROCEDURE
This model automatically tunes the TV channels for your area, then using Teletext information sorts the TV channels into a standard order and sets the clock. If the VCR has not previously been
1. Ensure your VCR is still in the STANDBY mode.
2. | Switch on the TV. |
|
| |
3. | Select the next available or unused channel on your TV, this will become the dedicated | |||
| video channel. |
|
|
|
| Example of | 1 = BBC1 | 4 = Channel 4 |
|
| 2 = BBC2 | 5 = Channel 5 |
| |
| TV channels |
| ||
| 3 = ITV | ? = VCR |
| |
|
|
| ||
4. | Press the STOP |
| button. The VCR will | EXAMPLE |
| search and display an ideal RF channel. |
| ||
| Wait for the flashing channel number to appear |
| ||
| on the VCR display, this number will be between |
| ||
| 21 and 69. |
|
|
|
•If you are connected via a scart lead, go to step 6.
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer to RF through ON/OFF on page 48.
5.Tune the selected channel on your TV. (Refer to your TV manual for instructions on how to tune in your TV).
Store this as your VCR channel.
TV SCREEN
AUT O I NS T AL L AT I ON
Blue
P R E S S S E T K E Y T O S T AR T . background with White Text
S E T : E N T E R | ME NU : E X I T |
NOTE:
If the AUTO INSTALLATION screen doesn’t appear when you switch on your VCR or you wish to reset your VCR and start the installation again, refer to VCR RESET at the back of the book.
6.Press the SET SET button to store the RF channel setting and continue with the installation.
See next page to continue 
www.sharp.co.uk/support
7