MORE INFORMATION ABOUT YOUR VCR
VCR RESET
1. Press the STOP | STOP | button on the front of the VCR. |
|
CHANNEL
2. Press and hold MENU and CHANNEL UP K buttons together on the front of the VCR for 10 seconds.
✔VCR RESET IS NOW COMPLETE
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel this can be set manually between channels 21 and 69 by following the procedure below.
1. Press the STANDBY | button. |
2.Press and hold the MENU 
button for 3 seconds.
3.Wait for a flashing channel number to appear on the VCR display.
4.The channel number can now be changed by using the MENU SELECT 
/ 
buttons.
5.Your TV will now require tuning to the new channel. (The screen opposite should be
displayed on the TV)
SET |
|
| |
6. Press the SET button to store. | V CR | R F | |
(Whitetext | S E T : E N T E R | ME NU : E X I T | |
blue background) | |||
|
|
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON. To do this press the CLEAR | then SET SET buttons on the |
remote control at point 3 from RF CHANNEL TUNING above or at point 4 of AUTO
TUNING on page 6. This will help minimise interference.
www.sharp.co.uk/support
49