Sharp DV-NC70 and DV-NC70X, DV-NC70W operation manual Troubleshooting

Page 102

Troubleshooting

Problem

Suggested Solution

Cassette cannot be loaded.

Make sure there is no other cassette inside.

 

Make sure the cassette is correctly positioned and then reinsert.

 

 

Picture does not change even

Make sure the Product is not in the timer setting or clock setting

though CH ' / " are pressed.

mode.

 

 

Selected programme position does

The channel may have been set to be skipped.

not appear.

Cancel the skip setting for that channel.

 

 

No colour appears during video

When a tape is recorded in the LP mode in the MESECAM

search and the like.

system, the picture is discoloured during video search, still and

 

similar modes. However, this does not indicate a malfunction.

 

 

Picture is skewed.

If a tape is recorded in the LP mode (regardless of whether it is a

 

MESECAM or PAL tape), the picture is skewed during video

 

search. However, this does not indicate a malfunction.

NICAM sound cannot be output.

Is NICAM set to OFF on the OSD mode?

 

 

DVD

Problem

Suggested Solution

 

 

The Product is switched on but does

Have you loaded a disc?

not operate.

Is the disc unplayable? (See pages 3 – 5.)

 

Is there dew in the Product? (See page 2.)

 

 

The playback image does not

Are the video and audio cables connected correctly? (See pages

appear.

14 – 17.)

No sound is produced.

Is the disc scratched? (See page 5.)

Is the disc dirty? (See page 5.)

Is the disc loaded upside down?

Is the input selector on the TV set to “VIDEO” or “AV”?

Is the audio equipment switched on and are all the components connected properly? (Refer to the operation manuals for your audio equipment.)

The sound is not Dolby Digital (5ch Is the disc you are playing recorded in Dolby Digital (5ch or

or 5.1ch).

5.1ch)?

Have you set the “ DIGITAL” in “AUDIO SETUP” to

 

“BITSTREAM”? (See page 45.)

The image and sound are garbled.

Is the disc scratched? (See page 5.)

Are vibrations from the speakers affecting the Product?

The sound is not stable during Set the “COMPRESSION” in “AUDIO SETUP” to “OFF” (See page

playback.

45.)

This Product is equipped with a microprocessor. Its performance could be adversely affected by external electrical noise or interference. If this should happen, unplug the Product and plug it in again after a few minutes.

GB 100

Image 102
Contents DV-NC70 DV-NC70X Only for DV-NC70WAbout This Manual Icon MeaningOnly for DV-NC70W/70 Only for DV-NC70XRear of product Location and Handling Do not put any foreign object on the disc trayDVD-R/DVD-RW Recording Modes Types of Discs that Can Be Played on This ProductRegion number for this Player is Samples of region number marks compatible with this PlayerDisc Function or Operation that is Not Available Icons Used on DVDsTitle, Chapter and Tracks Disc Handling and Maintenance Handling PrecautionsMaintenance Contents Recording a DVD Disc onto a Video Programming the Timer with G-CODESystemDpss Digital Program Search System 101Remote control unit FeaturesAccessories VIDEO/AUDIO cableMajor Components VCR Main Unit FrontVCR Front Panel Display DVD Main Unit Front DVD Front Panel DisplayRemote VCR Operation Buttons Loading the Batteries11 GB Number buttons REV Stop 18 VCR/DVD Change SwitchRemote DVD Operation Buttons CursorMain Unit Rear 13 GBJack Connecting to Antenna IN/RF OUTBasic Connection This ProductColour Output Jacks Y, PB CB and PR CR Connecting a TV Equipped with VIDEO/AUDIO Input JacksUsing the Component Colour Y, PB CB and PR CR Output Jacks 15 GBDVD Audio Connections Connecting a TV Equipped with S-VIDEO Input JacksConnecting to Audio Equipment Playing 2 channel audioThis Product Playing Dolby Digital 5.1 channel, DTS or Mpeg audio17 GB Audio equipmentVCR functions on Preparations Before Using the ProductPreparing to Watch a VCR or a DVD Remote will now Take priorityAdjusting the Video Channel 19 GBRF pattern Adjusting the Video Channel Auto Tuning System 21 GBPage Menu Screen Mode Selection 23 GBChannel Skip Menu item list VCR SetupMenu Screen Menu ScreenMode Selection 25 GBSet Ntsc to 3.58, 4.43 or PAL TV\with/. Then press Heard when the Auto mode is set. Selecting Select OFF when your TV does not have goodNicam signal reception and a lot of noise is OFF will change it to normal audio signalSetting the Channels 27 GBAuto Tuning Press / to select AUTO. PressSET to confirm29 GB Selected CH078 will disappearManual Tuning Press / to select Manual and pressSET to confirm31 GB Press / to select MANUAL. PressSET to confirm Channel Skip/Cancelling SkipSelect Channel Preset and pressSET to confirm Press / to select Skip33 GB Press \ / to set on and press SET to confirmCancelling Skip Press \ / to set OFF and press SET to confirmSetting the Clock Initial Setting of Clock35 GB Changing the Clock Setting Press SET to return to the normal screenChanging Language Setting the LanguageInitial Setting of Language 37 GBHow to Display Indicators VCR Display InformationDisplay Examples Language Code List for Disc Language 39 GBSetup item list DVD SetupAbout the Setup Screen Refer to the pages where the settingTV Mode Setting 41 GBPreparation See Preparing to Watch a DVD on Parental Level Setting PreparationSee Preparing to use DVD on Country Code List 43 GBPress to select Code and then press Enter Audio Setting Setting the Compression Dolby Digital output levelPreparation See Preparing to Watching a VCR or a DVD on 45 GB Setting the Dolby DigitalDigital setting in succession, proceed to below Use or to select on or OFFSetting the Mpeg Setting the Cinema Voice47 GB Disc Language SettingSetting SUBTITLE, Audio and Menu languages Preparation See Preparing to Watch a VCR or a DVD onSelecting languages from Other Example Selecting Other in Audio49 GB Operation Mode IndicatorsDVD Display Information Display Examples TV Screen DVD Front Panel Display RemarksLanguage Code List for Disc Language Recording with the Timer Simple Recording TimerProgramming the Timer with G-CODESystem DV-NC70W only PlaybackPlayback PlaybackInserting a Video Cassette Video Search with the RemoteStill Picture and Frame Advance Fast Forwarding and RewindingSlow Motion Playback with the Remote Double Speed PlaybackFull Auto Playback Auto Head Cleaning SystemNtsc Tape Play Back on PAL TV Auto Tracking Control SystemAuto Rental 55 GBPress / to select Colour Press \ / to select AUTO, PAL, Mesecam or NtscPlayback of Hi-Fi Recorded Tapes Audio Output ModeAdjusting Hi-Fi Audio Tracking 57 GBSharp Super Picture Select S.PICTURE with / . Then set it to on or OFF with \Auto Repeat 59 GBAuto Zero Back Skip Search Index signalDpss Digital Program Search System/Skip Search 61 GBTo Watch Another TV Programme While Recording TV Programme RecordingCassette Erase Protection Cassette has a removable tab to prevent accidentalHi-Fi track Recording NICAM/IGR Multiplex Broadcasts63 GB Normal trackSimple Recording Timer Immediate Recording65 GB Set the G-CODEnumber with the number buttons 0 toSelect the tape speed with Press SETPR Preset Channel Setting the Programme Number In StepProgramming the Timer with G-CODESystem 67 GBRecording with the Timer Press VCR MENU. Then select Timer with / and pressSP will be displayed automatically 69 GB Once Weekly Daily Select Change Setenter MenuexitSelect the speed with Confirming Timer Programmes Select Timer with / and then press SET to confirm71 GB Cancelling Timer Programmes Tape Dubbing Tape Dubbing Connection Instructions73 GB Recording a DVD disc onto a Video cassette Tape Editing mode Recording a DVD Disc onto a Video Cassette75 GB Recording a DVD Disc onto a Video CassettePage Angle Selection Playing MP3 Discs 77 GBBasic Play Track Direct Playback Selecting Scenes by Title NumberMove VCR/DVD Change Switch on the Remote to DVD When connecting a TV with the DVD output jacksWhen connecting a TV with the DVD/VCR shared output jacks Preparing to Use DVDDisc Basic PlayTrack Direct Playback 79 GBFast Forward/Fast Reverse Slow-Motion PlaySkip Forward/Reverse Still/PauseFrame Advance 81 GBSequence of angle shots Angle Selection DVDStipulated by the manufacturers is ExamplePlaying MP3 discs Playing MP3 DiscsRegarding MP3 discs 83 GBTo skip the file while playing To play MP3 discsTo play another file music title while playing While the MP3 disc is playingAbout the Function Control Screen 85 GBDirect skip title track/chapter/time Use or to select Then press EnterExample Direct title skip Subtitle language setting 87 GBUse or to select and then press Enter Angle setting Press or to select the angle number you want+R L R Press Enter to confirm the setting 89 GBPress or to select the audio format you want to use 3D Virtual Surround setting To use the 3D Virtual Surround functionPress or to toggle Digital Gamma between on and OFF Digital Gamma setting91 GB Use \ or to change the levelSelecting Scenes from the Menu Screen 93 GB Programmed PlaybackChapter Programmed Playback Will be cleared Press ûPLAYTrack Programmed Playback Example CD Program screenMP3 Files Programmed Playback 95 GBPress or to select the desired folder and then press Repeat Playback DVD Repeat playbackDVD C D Repeat 97 GBThis resume operation is cancelled in the following cases Resume Function DVD99 GB TroubleshootingProblem Suggested Solution See page 2 for information CondensationTroubleshooting Definition of Terms 101 GBOnly for DV-NC70W, DV-NC70 Common names Names of Nations and AreasList of the region number 4 countries 103 GBDefinition of Terms Only for DV-NC70X Common namesSpecifications Memo Memo Sharp Corporation