Sharp DV-NC70W Setting the Language, Initial Setting of Language, Changing Language, 37 GB

VCR Setup

Setting the Language

This Product is factory preset to display the LANGUAGE setting screen after VCR MENU is pressed when the Product is operated for the first time. In some cases, the retailer may have already set the language, and the CLOCK setting screen will appear after VCR MENU is pressed. To reset the Product, perform the following steps.

VCR-RESET

1 Press OPERATE to POWER OFF on the Product.

2 Press OPERATE to POWER ON on the Product.

OPERATE ON/OFFTIMER

ON

DISPLAY SCREEN

DV- NC70W	G-CODE
DV- NC70	PROG
DV- NC70X

EJECT

VCR/DVD VCR MENU

SELECTOR DVD SETUP

3 Press VCR MENU and CH " on the Remote at the same time for five seconds. (The LANGUAGE setting screen should appear.)

•When the Product is reset, all channel settings, guide channel setting for the G-CODE system and timer setting will be cancelled.

Initial Setting of Language

Preparation

•Press OPERATE. Then move the VCR/DVD CHANGE Switch to VCR.

1 Press ' / " to select the language and press SET to confirm.

LANGUAGE

ENGLISH

Changing Language

FUNCTION	PROG/	ANGLE	OPEN/
CONTROL	REPEAT		CLOSE
TITLE			DVD MENU
CLEAR			SET
RETURN			ENTER
			ZERO BACK
			SKIP SEARCH
AM/PM	INPUT SELECT VCR DVD
/
REV			FWD
	PLAY
REC			PAUSE/STILL
	STOP
TAPE	DPSS		SLOW
SPEED	SKIP
CH	AUDIO
	OUTPUT
	VCR	DVD

If the language has already been set previously and you want to change it, follow the steps below.

1 Press VCR MENU. Press ' / " to select “LANGUAGE ” and press SET to confirm.

VCR/DVD COMBINATION

MENU

G-CODE

TIMER

MODE

CHANNEL PRESET

CLOCK

LANGUAGE

:SELECT

SET:ENTER MENU:EXIT

2 Select the language with ' / " and press SET to confirm.

LANGUAGE

ENGLISH

3 Press VCR MENU to return to the normal screen.

37 GB