Sharp DV-NC70 and DV-NC70X Only for DV-NC70W/70, Only for DV-NC70X, Rear of product

Page 3

SAFETY INFORMATION

<Only for DV-NC70W/70>

Note:

This Product can be used only where the power supply is AC 110V-240V, 50/60Hz. It cannot be used elsewhere.

<Only for DV-NC70X>

Note:

This Product can be used only where the power supply is AC 240V, 50Hz. It cannot be used elsewhere.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

AS THE LASER BEAM USED IN THIS PRODUCT IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

Laser Diode Properties

Material: AlGaInP

Wave length: 650 nm

Emission Duration: Continuous

Laser output: Max. 0.7 mW

Power Cord Protection

To avoid any malfunctions of the Product, and to protect against electric shock, fire or personal injury, please observe the following.

Hold the plug firmly when connecting or disconnecting the AC power cord.

Keep the AC power cord away from heating appliances.

Never put any heavy object on the AC power cord.

Do not attempt to repair or reconstruct the AC power cord in any way.

This Product is classified as a CLASS 1 LASER product.

The CLASS 1 LASER PRODUCT label is located on the rear cover.

This product contains a low power laser device. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

CLASS 1

LASER PRODUCT

(Rear of product)

CAUTION-LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM

OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

VORSICHT-LASERSTRAHLUNG, WENN GEFFNET. BLICKEN SIE NICHT IN DEN STRAHL

UND BETRACHTEN SIE DIESEN NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN.

ATTENTION-RADIATION LASER EN CAS D'OUVERTURE. NE PAS FIXER LE

FAISCEAU NI REGARDER DIRECTEMENT DES INSTRUMENTS OPTIQUES.

 

VARNING-LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. STIRRA EJ IN

SA005WJ

I STRÅLEN OCH BETRAKTA EJ STRÅLEN MED OPTISKA INSTRUMENT.

VARO ! AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE. ÄLÄ TUIJOTA

SÄTEESEEN ÄLÄKÄ KATSO SITÄ OPTISEN LAITTEEN LAPI.

VARNING-LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. STIRRA EJ IN I

STRÅLEN OCH BETRAKTA EJ STRÅLEN GEMON OPTISKT INSTRUMENT.

ADVARSEL-LASERSTRÅLING NÅR DEKSEL ÅPNES. STIRR IKKE INN I

STRÅLEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER.

ADVARSEL-LASERSTRÅLING VED ÅBNING. SE IKKE IND I STRÅLEN-

HELLER IKKE MED OPTISKE INSTRUMENTER.

INFORMATION

GENERAL

 

 

1 GB

Image 3
Contents Only for DV-NC70W DV-NC70 DV-NC70XIcon Meaning About This ManualOnly for DV-NC70W/70 Only for DV-NC70XRear of product Do not put any foreign object on the disc tray Location and HandlingSamples of region number marks compatible with this Player Types of Discs that Can Be Played on This ProductRegion number for this Player is DVD-R/DVD-RW Recording ModesDisc Function or Operation that is Not Available Icons Used on DVDsTitle, Chapter and Tracks Disc Handling and Maintenance Handling PrecautionsMaintenance Contents 101 Programming the Timer with G-CODESystemDpss Digital Program Search System Recording a DVD Disc onto a VideoVIDEO/AUDIO cable FeaturesAccessories Remote control unitMajor Components VCR Main Unit FrontVCR Front Panel Display DVD Front Panel Display DVD Main Unit FrontRemote VCR Operation Buttons Loading the Batteries11 GB Cursor 18 VCR/DVD Change SwitchRemote DVD Operation Buttons Number buttons REV Stop13 GB Main Unit RearThis Product Connecting to Antenna IN/RF OUTBasic Connection Jack15 GB Connecting a TV Equipped with VIDEO/AUDIO Input JacksUsing the Component Colour Y, PB CB and PR CR Output Jacks Colour Output Jacks Y, PB CB and PR CRPlaying 2 channel audio Connecting a TV Equipped with S-VIDEO Input JacksConnecting to Audio Equipment DVD Audio ConnectionsAudio equipment Playing Dolby Digital 5.1 channel, DTS or Mpeg audio17 GB This ProductRemote will now Take priority Preparations Before Using the ProductPreparing to Watch a VCR or a DVD VCR functions onAdjusting the Video Channel 19 GBRF pattern Adjusting the Video Channel 21 GB Auto Tuning SystemPage Menu Screen Mode Selection 23 GBChannel Skip Menu Screen VCR SetupMenu Screen Menu item listMode Selection 25 GBSet Ntsc to 3.58, 4.43 or PAL TV\with/. Then press OFF will change it to normal audio signal Select OFF when your TV does not have goodNicam signal reception and a lot of noise is Heard when the Auto mode is set. Selecting27 GB Setting the ChannelsPress / to select AUTO. PressSET to confirm Auto TuningSelected CH078 will disappear 29 GBPress / to select Manual and pressSET to confirm Manual Tuning31 GB Press / to select Skip Channel Skip/Cancelling SkipSelect Channel Preset and pressSET to confirm Press / to select MANUAL. PressSET to confirmPress \ / to set on and press SET to confirm 33 GBPress \ / to set OFF and press SET to confirm Cancelling SkipSetting the Clock Initial Setting of Clock35 GB Press SET to return to the normal screen Changing the Clock Setting37 GB Setting the LanguageInitial Setting of Language Changing LanguageHow to Display Indicators VCR Display InformationDisplay Examples 39 GB Language Code List for Disc LanguageRefer to the pages where the setting DVD SetupAbout the Setup Screen Setup item listTV Mode Setting 41 GBPreparation See Preparing to Watch a DVD on Parental Level Setting PreparationSee Preparing to use DVD on Country Code List 43 GBPress to select Code and then press Enter Audio Setting Setting the Compression Dolby Digital output levelPreparation See Preparing to Watching a VCR or a DVD on Use or to select on or OFF Setting the Dolby DigitalDigital setting in succession, proceed to below 45 GBSetting the Cinema Voice Setting the MpegPreparation See Preparing to Watch a VCR or a DVD on Disc Language SettingSetting SUBTITLE, Audio and Menu languages 47 GBExample Selecting Other in Audio Selecting languages from OtherDisplay Examples TV Screen DVD Front Panel Display Remarks Operation Mode IndicatorsDVD Display Information 49 GBLanguage Code List for Disc Language Playback Simple Recording TimerProgramming the Timer with G-CODESystem DV-NC70W only Recording with the TimerVideo Search with the Remote PlaybackInserting a Video Cassette PlaybackDouble Speed Playback Fast Forwarding and RewindingSlow Motion Playback with the Remote Still Picture and Frame AdvanceAuto Tracking Control System Auto Head Cleaning SystemNtsc Tape Play Back on PAL TV Full Auto Playback55 GB Auto RentalPress \ / to select AUTO, PAL, Mesecam or Ntsc Press / to select Colour57 GB Audio Output ModeAdjusting Hi-Fi Audio Tracking Playback of Hi-Fi Recorded TapesSelect S.PICTURE with / . Then set it to on or OFF with \ Sharp Super Picture59 GB Auto RepeatAuto Zero Back 61 GB Index signalDpss Digital Program Search System/Skip Search Skip SearchCassette has a removable tab to prevent accidental TV Programme RecordingCassette Erase Protection To Watch Another TV Programme While RecordingNormal track Recording NICAM/IGR Multiplex Broadcasts63 GB Hi-Fi trackImmediate Recording Simple Recording TimerSet the G-CODEnumber with the number buttons 0 to 65 GBPress SET Select the tape speed with67 GB Setting the Programme Number In StepProgramming the Timer with G-CODESystem PR Preset ChannelRecording with the Timer Press VCR MENU. Then select Timer with / and pressSP will be displayed automatically Once Weekly Daily Select Change Setenter Menuexit 69 GBSelect the speed with Confirming Timer Programmes Select Timer with / and then press SET to confirm71 GB Cancelling Timer Programmes Tape Dubbing Tape Dubbing Connection Instructions73 GB Recording a DVD Disc onto a Video Cassette Recording a DVD disc onto a Video cassette Tape Editing modeRecording a DVD Disc onto a Video Cassette 75 GBPage Selecting Scenes by Title Number 77 GBBasic Play Track Direct Playback Angle Selection Playing MP3 DiscsPreparing to Use DVD When connecting a TV with the DVD output jacksWhen connecting a TV with the DVD/VCR shared output jacks Move VCR/DVD Change Switch on the Remote to DVD79 GB Basic PlayTrack Direct Playback DiscSlow-Motion Play Fast Forward/Fast Reverse81 GB Still/PauseFrame Advance Skip Forward/ReverseExample Angle Selection DVDStipulated by the manufacturers is Sequence of angle shots83 GB Playing MP3 DiscsRegarding MP3 discs Playing MP3 discsWhile the MP3 disc is playing To play MP3 discsTo play another file music title while playing To skip the file while playing85 GB About the Function Control ScreenDirect skip title track/chapter/time Use or to select Then press EnterExample Direct title skip Subtitle language setting 87 GBUse or to select and then press Enter Press or to select the angle number you want Angle setting+R L R Press Enter to confirm the setting 89 GBPress or to select the audio format you want to use To use the 3D Virtual Surround function 3D Virtual Surround settingUse \ or to change the level Digital Gamma setting91 GB Press or to toggle Digital Gamma between on and OFFSelecting Scenes from the Menu Screen Will be cleared Press ûPLAY Programmed PlaybackChapter Programmed Playback 93 GBExample CD Program screen Track Programmed PlaybackMP3 Files Programmed Playback 95 GBPress or to select the desired folder and then press Repeat playback Repeat Playback DVD97 GB DVD C D RepeatResume Function DVD This resume operation is cancelled in the following casesSee page 2 for information Condensation TroubleshootingProblem Suggested Solution 99 GBTroubleshooting 101 GB Definition of TermsCommon names Names of Nations and Areas Only for DV-NC70W, DV-NC70Common names 103 GBDefinition of Terms Only for DV-NC70X List of the region number 4 countriesSpecifications Memo Memo Sharp Corporation