Sharp DV-NC70W, DV-NC70 and DV-NC70X Playback of Hi-Fi Recorded Tapes, Audio Output Mode, 57 GB

Playback

Playback of Hi-Fi Recorded Tapes

This Product will play back both video and audio, or audio-only tapes recorded in the Hi-Fi mode.

•Stereo sound output is only possible using the AUDIO OUT terminals. Sound from the radio frequency converter (RF OUT) is mono only. A blue screen will appear if audio-only Hi-Fi tapes are played back.

Audio Output Mode

OPERATE ON/OFFTIMER

ON

DISPLAY SCREEN

DV- NC70W

DV- NC70

DV- NC70X

EJECT

VCR/DVD VCR MENU SELECTOR DVD SETUP

G-CODE

PROG

The audio output mode is controlled by AUDIO OUTPUT on the Remote. The Product is normally set to the Hi-Fi mode, with and displayed on the VCR Front Panel display, and normal stereo sound output.

Select , and only the Hi-Fi Left channel audio is heard from both the Right and Left speakers.

Select , and only the Hi-Fi Right channel audio is heard from both the Right and Left speakers.

If you select the mono linear track, and will disappear.

•Should the Hi-Fi output level be poor, the Product will automatically select the mono linear track output.

•When playing back tapes which have only Hi-Fi sound recorded:

If Hi-Fi sound is not reproduced, or if there is some noise in the audio, press CH ' / " until the sound improves.

Adjusting Hi-Fi Audio Tracking

(To adjust the Hi-Fi tracking manually when playing back a poorly recorded Hi-Fi tape.)

•Normally you can simultaneously press and hold both CH ' / " to obtain the optimal Hi-Fi audio tracking.

•If Hi-Fi audio is unstable (frequent dropouts, etc.) with a rental video, a tape recorded on another VCR, restore normal tracking while playing back the tape as described below:

1 Press ON SCREEN on the Remote and select the Full Display mode. (See page 36.)

2	Simultaneously press CH ' / ".
3	Press CH ' / " repeatedly at equal, short intervals until the
	and	indicators disappear from the On Screen Display (OSD).

4 Press CH ' / " in the same manner while counting button operations until the L and R indicators reappear and then disappear again.

5 Press CH ' / " again for half the number of times counted in step 4 above to obtain optimal track.

FUNCTION	PROG/	ANGLE	OPEN/
CONTROL	REPEAT		CLOSE
TITLE			DVD MENU
CLEAR			SET
RETURN			ENTER
			ZERO BACK
			SKIP SEARCH
AM/PM	INPUT SELECT VCR DVD
/
REV			FWD
	PLAY
REC			PAUSE/STILL
	STOP
TAPE	DPSS		SLOW
SPEED	SKIP
CH	AUDIO
	OUTPUT
	VCR	DVD

VCR/DVD COMBINATION

57 GB