Sharp DV-NC70W Playing Dolby Digital 5.1 channel, DTS or Mpeg audio, 17 GB, This Product

DVD Audio Connections

Playing Dolby Digital (5.1 channel), DTS or MPEG audio

Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/ DTS/MPEG Audio surround processor to your Product’s coaxial digital jack provides richer and more powerful audio play.

■Connection to a processor or amplifier with a coaxial digital input jack

You can make this connection using a coaxial digital cable.

Required cable

Coaxial digital cable (commercially available)

	DVD OUT	DVD/VCR		VCR
	LINE OUT 2	LINE OUT 1	LINE IN 1	ANTENNA IN
COMPONENT		R	R
Y	DIGITAL	AUDIO	AUDIO
	AUDIO
				RF OUT
		L	L
PB	S-VIDEO R	VIDEO	VIDEO
(CB)	AUDIO
PR	L
(CR)

This Product	To coaxial
	DIGITAL OUT jack

Coaxial digital cable (commercially available)

To coaxial

digital input jack

DIGITAL IN

COAXIAL

Audio equipment

Digital Connection to an MD to Record a CD Some Audio CDs and VIDEO CDs have a short silent section between musical tracks. When sound from discs such as these is digitally recorded by connecting the Product directly to a digital recorder (such as an MD player), the music may be recorded continuously and track numbers may be lost.

■Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder

• Audio CD or VIDEO CD

Play the disc as you normally would, with the audio mode set to “L+R” (see page 89). With a digital connection, audio of a disc recorded with DTS sounds abnormal in this case.

• DVD

With a digital connection, audio cannot be produced from a DVD recorded with Dolby Digital (5.1 channel), Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such discs. Discs with linear PCM audio should play normally.

•This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial digital input jack.

17 GB