HDMI devices
Connecting a player/recorder only | Connection for using “Speaker Output” |
HDMI 4
HDMI 1 HDMI 2 HDMI 3 (ARC)
Player/Recorder
HDMI CEC (Consumer Electronics Control) menu
Basic operation
Go to Menu> Settings>Input Settings>HDMI CEC and select the menu you want to set.
You can choose to listen to the TV sound only from the speaker system.
1.Set to On and press 6.
The sound from the TV speaker is silenced and only the sound from the speaker system is audible.
2.Set to Off and press 6.
Speaker system is silenced and TV speaker is audible.
You need to use
NOTE
•When you use "Speaker Output" make sure to use a HDMI cable 1.4 or upper.
Device List
If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here.
Press a/b to select “Model select”, and then press OK. The HDMI device changes every time you press OK.
HDMI CEC control
Set to On to enable HDMI CEC functions.
Device Scan
Search all HDMI devices connected to the TV.
Auto TV Power On
If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.
NOTE
• The factory default for this item is “Off”.
Auto Link Power Off
If this function is set to On, is possible to power off all HDMI devices connected in a daisy chain.
Speaker Output (Audio Return Channel)
If this function is set to On, the TV can send audio data for video content shown on the TV to a connected audio device to HDMI 1 with just one
NOTE
•ARC is only available in HDMI 1 terminal.
Operating a HDMI CEC device
HDMI CEC allows you to operate the
USB REC
1Press Ito start playback of a title.
2Press Jto fast forward.
•Press Gto reverse.
•Press REC Eto start recording.
•Press REC STOP Hto stop recording.
•Press Hto stop.
•Press Fto pause.
•Press SOURCE ato turn the HDMI- connected device on/off.
30