Network Setup

●How to connect

1 Switch on your router before starting the network installation.

2 Connect the AN-WUD630 USB adapter (sold separately) to the USB Wi-Fi port on the TV.

•Do not use a wireless LAN adapter other than the AN- WUD630 Sharp wireless LAN adapter, as operations cannot be guaranteed.

•If your wireless network is secured, have the encryption key ready to enter on screen.

3 Go to “Settings” >”Network settings”> “Network type”.

4 Press OK and ▲/▼ to select “Wireless”, and then press OK.

The "Wireless" connection will be automatically selected if the TV detects only the wireless USB adapter.

5 Select "Wireless setup".

There are three ways to connect by wireless the TV to a network:

•Easy setup

WPS functionallity required on Router/AP, in case of router/access point does not support WPS go to Assisted Setup explanation.

•PBC (Push-Button)

1Select WPS configuration and press OK. Press ▼ to select "PBC" and press OK.

2Press ▼ to select Start scan and press OK.

3Press the WPS button on the router/access point (AP). Wait until the connection is established.

•If connection failed, please be sure WPS feature is enabled (See the operation manual of your router/ access point(AP) for setup.)

•PIN

If router/AP hasn't available the WPS Push-Button, then PIN method should be selected.

1Select WPS configuration and press OK. Select "PIN" and press OK.

2Press ▼ to select Start Scan and press OK.

3A list of available networks is displayed, select the desired name (SSID) and press OK.

4Enter the PIN number (8 digits) on the Router/ AP WPS PIN box. Follow the operation manual of the router/access point(AP) instructions to introduce the PIN number.

5Press ▼ to select Next and press OK. Wait until the connection is stablished.

•Assisted setup

Shows the network name list (SSID).

1 Select the network you want to connect.

2 If network is protected, introduce the encryption key using the software keyboard and press Green button.

3 Select Done and press OK.

The TV will connects to the network you have selected.

•Manual setup

Allows you to establish the wireless connection introducing all data manually.

•Advanced Network Setup

Allows you to introduce manually all network setup.

•Network Connection Test Check the connection status.

NOTE

•To connect your TV to the internet, you must have a broadband internet connection.

•If you do not have a broadband internet connection, consult the store where you purchased your TV or ask your internet service provider or telephone company.

•There is no need to enter the security key for subsequent connections to the wireless network.

•If your access point is set to a stealth mode (Hidden SSID, that prevents detection by other devices), you may not be able to establish a connection. In this case, disable the stealth mode on the access point.

•To change wireless LAN connection settings, go to “Settings” > “Network Settings”.

•Any low bandwidth adapter (router, hub, wireless access point,…) will show poor network connection and then, poor streaming quality. It’s recommended 56 Mbps or higher bandwidth for full feature.

•Working close to other Wireless/Bluetooth network, can appear some trouble using Wi-Fi adapter on the internet conection TV. Due to wireless link cannot be guarantee, please try to change Wi-Fi channel on Access Point (AP) for avoiding interferences. Please refer to Access Point User Manual.