Enjoying 3D image viewing
Enjoying 3D image viewing
You can enjoy
Confi rm how to use the 3D glasses before watching
Viewing 3D images
1Select the 3D source (HDMI).
2Press "3D" button on Remote Control.
NOTE
•The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode.
Receiving a 3D image signal that can be detected automatically
The image signal may contain a 3D identification signal. You can enable the TV to automatically detect the 3D image type.
•After pressing 3D button a screen appears prompting you to select between the following options.
EWhen “3D Display” is set to “ON (AUTO)”
The 3D display format is detected automatically and the appropriate 3D image is displayed.
EWhen “3D Display” is set to “Off (2D)”
The image is displayed as 2D format.
Receiving a 3D image signal that cannot be detected automatically
When the TV receives a 3D image signal that cannot be detected automatically, you can select between 3D and 2D image viewing.
1Select the 3D source (HDMI).
2Press "3D" button on Remote Control.The following screen appears.
3Press c/d to select
E To view in 3D mode (Top-Bottom or Side- by-Side)
1Press a/b to select the 3D signal type (“Side
by Side” or “Top and Bottom”), and then press ;.
•If you select the same system as that of the input signal, 3D images are displayed.
2Turn on the 3D glasses switching them to "3D" and then wear the 3D glasses.
•The LED lights in green.
E To view in 2D mode
To view 2D mode without glasses:
1Press a/b to select the "Off (2D)”, and then press ;.
To view 2D mode some of you at the same time than other people are viewing 3D mode:
1Follow up the step 1 of previously described in "To view in 3D mode
2Turn on the 3D glasses switching to "2D" and then wear the 3D glasses.
•The LED lights in green.
NOTE
•After approximately 10 minutes without receiving 3D signal the 3D glasses turn off automatically.
•To power off the power of 3D glasses, switch them to Off. The LED will also turn off.
37