Sharp LC-46LE730E Preparation, Supplied accessories, Attaching the stand unit, Optional accessory

Preparation

Supplied accessories

Remote control unit	• “AAA” size battery (g2)	•	Operation manual (This publication)
(g1)		•	Cable tie (x1)	• Stand unit (x1)

• Antenna adapter (40" only)

Attaching the stand unit

•Before attaching (or detaching) the stand, unplug the AC cord.

•Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.

CAUTION

•Attach the stand in the correct direction.

•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

Inserting the stand

Insert the stand into the openings on the bottom of the TV (Hold the stand so it will not drop from the edge of the base area).

Insert and tighten the four screws into the four holes on the rear of the TV.

Soft cushion

NOTE

•To detach the stand unit, perform the above steps in reverse order.

Optional accessory

The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop.

•Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

No.	Part name	Part number
1	Wall mount bracket	AN-52AG4
2	Wi-Fi adapter	AN-WUD630
3	3D glasses	AN-3DG20-B

Fixing the TV on a wall

•This TV should be fixed on a wall only with the wall fix bracket available from SHARP (above table). The use of other wall fix brackets may result in an unstable installation and may cause serious injuries.

•Fixing the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper fixing or fixing that results in accident or injury.

•You can ask qualified service personnel about using an optional bracket to fix the TV on a wall.

•To use this TV fixed on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and then use the screws supplied with the wall fix bracket to secure the bracket to the rear of the TV.

•When you fix the TV on a wall, you should attach the supporting post.

5