Quick guide
Before turning on the power
AC cord
Product shape varies
in some countries.
Place the TV close to the AC outlet, and keep the power plug within reach.
1Carefully insert the CI Module in the CI slot with the contact side forward.
2The logo on the CI Module must be facing outward from the rear of the TV.
Standard DIN45325 plug (IEC
Inserting a CA Card
In order to receive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of the TV.
The CI Module and the CA Card are not supplied accessories. They are usually available from your dealers.
Inserting the CA Card into the CI Module
1 With the side with the gold coloured contact chip facing the side of the CI Module marked with the provider’s
logo, push the CA Card
into the CI Module as far as it will go. Note the direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
2Carefully insert the CI Module in the CI slot with the contact side forward. The
logo on the CI Module must be
facing outward from the rear of the TV. Do not use excessive force. Make sure the module is not bent in the process.
NOTE
Checking CI Module information
1Press MENU and the “PICTURE” menu is shown.
2Press c/d to select “CHANNEL” menu.
•The content of this menu depends on the provider of the CI Module.
3Press a/b to select “CI information”, and then press OK.
●Module
General information on CI Module displays.
●Menu
Adjustment parameters of each CA Card displays.
●Enquiry
You can input numerical values such as passwords here.
NOTE
The content of each screen depends on the provider of the CI Module.
•Make sure that the CI module is properly inserted.
•This menu is only available for digital stations.
•It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first time. This process may fail when there is no antenna input or you have never run “Auto installation”.
•The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use the power button during upgrading.
•The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out.
•If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the screen prompts.
8