Basic adjustment
Software update via USB
1 Add the binary file to USB memory root.
2 Insert the memory in any USB side TV set socket.
3 The next message appear:
4 Press ◄ to select Yes and press OK. The software update will start
•The updated percentage appears.
5 When software update finishes, remove the USB memory and press Ok to reset the TV.
6 Return to Settings < Product information menu to check that the version has been updated successfully.
●Restore factory default
Recover the configuration that the TV had when it left the factory.
Channel list
Selecting the channel
you want to watch
1 Press OK and the list of tuned channels will be displayed.
2 Use ▲/▼ to select the channel you want to watch and press OK.
Channel information display
(DTV/CADTV only)
You can display the channel information that you are watching at this moment by pressing pon the remote control unit.
Information that appears on the screen:
Program number Program name Age classification Audio
Available Services: Radio / Teletext /
Subtitles / Encripted Information about the program which is
being broadcast
CLEARING THE PIN
If you lose or forget your PIN, you can clear the PIN following these steps:
1 Go to «MENU»→«LOCK».
2 Enter “3001” to cancel out the current PIN.
The current PIN is reset to “3001”.
25