Panasonic DMR-ES20DEB Connecting to a Satellite Receiver, Follow the steps below, Antenna, Aerial

Connecting to a Satellite Receiver

									Parabolic
									antenna
		Aerial
									Sat cable
									21-pin Scart socket
									2
					AC mains socket
	RF cable /
	Aerial cable
	2							3
							To AC mains socket		21-pin Scart cable
TV
	Aerial input	RF IN		(AV1)
		Aerial input
					DVD Recorder
AC mains	RF cable /				VIDEO	S VIDEO OUT
socket	Aerial cable		AV1 (TV)		AUDIO		Y PB	PR
		RF OUT	RF IN		L	L
						S VIDEO	OPTICAL		AC IN
	2						COMPONENT		1
					R	R AV4 IN	VIDEO OUT
			AV2 (DECODER/EXT)		AV4 IN OUT		(PROGRESSIVE/ DIGITAL AUDIO OUT
							INTERLACE) (PCM/BITSTREAM)
									AC IN~
		RF OUT	(AV2)
3 AC mains lead	Aerial output
									3 AC mains
	21-pin Scart cable								lead

1

Follow the steps below.

Disconnect the AC mains from all units.

1Connect a 21-pin Scart cable (fully wired) to the AV2 21-pin Scart socket of the DVD Recorder and to the 21-pin Scart socket of the satellite receiver.

Connect a 21-pin Scart cable (fully wired) to the AV1 21-pin Scart socket of the DVD Recorder and to the 21-pin Scart socket of the TV set.

2

3

Connect aerial to the RF IN (Aerial input) of the DVD Recorder.

Connect the parabolic antenna to the Aerial in connector of the satellite receiver. Connect the DVD Recorder´s RF OUT (Aerial output) to the TV set’s Aerial in connector.

Connect the satellite receiver, DVD Recorder and TV set to the AC mains supply.

Switch on the TV set and DVD Recorder.	46
Set the settings for AV2 according to the connected satellite receiver.

Switch on the satellite receiver. Then follow page 11 for Auto-Setup with 21-pin Scart cable.

13