External devices
This device can playback stereo sound in Dolby Digital (2 channels). Connect an amplifier with
Connect this unit to a device with a DTS decoder in order to be able to play DVDs with this symbol.
Connecting an analogue amplifier or an analogue system component
In order to enjoy stereo or Dolby Pro Logic, connect the appropriate amplifier or an analogue audio component.
!Connect the analogue output (L/R) e.g. to a Dolby Pro Logic amplifier.
!As described, connect the Audio cable according to the colours and markings of the connection sockets (white/L, red/R).
|
| Amplifier (example) | ||
| VIDEO | R | L | |
|
| |||
|
| AUDIO IN | ||
L | L |
|
| |
| AUDIO | White/L | Red/R | |
R | R | |||
|
| |||
AV4 IN | OUT |
|
| |
AUDIO OUT (L/R) | Audio cable |
| ||
|
|
Connecting a digital amplifier or a digital system component
! Connect an amplifier with a Dolby
! In the Sound SETUP menu, change the [Digital Audio Output] setting
45
according to your connected digital amplifier.
You cannot use DTS Digital Surround decoders that are not suitable for DVD.
Amplifier (example) |
|
|
OPTICAL |
|
|
Y | PB | PR |
| OPTICAL |
|
Optical digital | DIGITAL AUDIO OUT | |
(PCM BITSTREAM) | ||
|
|
audio cable
Push the jack all the way into the socket with this side facing up.
Connecting to the AV3 input sockets (e.g. Camcorder)
Before you connect the cable, make sure that the power to both devices is turned off. After you have connected the cables, switch both devices on.
If the audio output of the other device is mono, connect it to the L/MONO socket. Both the left and the right channels will be recorded if the connection is made via the L/MONO socket.
Choose one of the two connection possibilities.
Connection with S VIDEO cable and audio cable (L/R) produces the best quality.
S VIDEO IN | VIDEO IN L/MONO - AUDIO IN - R |
AV3
A B
Audio/
Video cable
A White (L)
S VIDEO cable
B Red (R)
S VIDEO IN | VIDEO IN L/MONO - AUDIO IN - R |
AV3
A B C
Audio/
Video cable
A Yellow (Video)
B White (L)
C Red (R)
17