Panasonic DMR-ES20DEB manual Picture Settings, Sound Settings, Seamless Play On Off

FUNCTIONS Selection Menu

S

N

F U N C IT O

To Others SETUP

SETUP

Tuning

Disc

Picture

Sound

Display

Connection

Others

Comb Filter	On
Still Mode	Automatic
Seamless Play	On

SELECT

TAB

RETURN

Picture	Settings	ENTER	Option	ENTER
Comb Filter		[On] [Off]
On: The picture becomes clear and contour-rich. This setting is always set to [On] if you
have selected [TV System - NTSC].
Off: If the picture to be recorded is grainy.
Still Mode		[Automatic] [Field]	[Frame]

Select the display of the still image.

Field: Select this function, if the picture is disturbed with the [Automatic] setting.

Frame: Select this function if small text or line structures are not displayed clearly with the [Automatic] setting.

Frames are still images that together form a moving picture. A full frame is made up of 2 half frames. The picture can appear blurry but the overall quality is good.

A half frame only contains half of the information of a full frame and has a poorer picture quality.

Seamless Play [On] [Off]

On: When playing playlists, the transitions from one chapter to the next are improved. The end and beginning of the chapters can shift slightly and the transition is smooth.

Off: The transitions between the chapters are played as they were recorded. The picture may freeze for a second during the transition.

Seamless Play does not work if several audio channels are recorded..

SETUP	Dynamic Range Compression	Off
	Bilingual Audio Selection	M1
Tuning	Digital Audio Output
Disc
Picture
Sound
Display
Connection	TAB SELECT
Others	RETURN

SETUP	Digital Audio Output
	PCM Down Conversion		Off
Tuning	Dolby Digital		Bitstream
	DTS		Bitstream
Disc
	MPEG		PCM
Picture	Dolby Digital
Sound
		Bitstream
Display
Connection		PCM
Others
	SELECT
	ENTER
	RETURN

Sound	Settings	ENTER	Option	ENTER
Dynamic Range Compression DVD-V(only Dolby Digital)		[On] [Off]

On: The level of quiet sections is increased and the level of loud sections is decreased. The sound is still clearly audible when the volume is decreased.

Bilingual Audio Selection -R			[M 1] [M 2]
	-RW(V)	+R

If you want to record programmes on discs that were broadcast in dual channel tone, you can choose between the original language [M 1] or another available language [M 2].

If you are copying from an external source or a tape position to disc, select the sound track on the other unit.

Digital Audio Output	[PCM Down Conversion], [Dolby Digital], [DTS], [MPEG]
Select the appropriate setting if an external unit is connected
to the DIGITAL AUDIO OUT of the DVD Recorder.
PCM Down Conversion	[On] [Off]

Select the audio output mode at a scanning frequency of 96 kHz or 88.2 kHz.

Despite this setting, signals are converted to 48 kHz or 44.1 kHz if they have a scanning frequency of more than 96 kHz or 88.2 kHz or a disc is copy-protected.

On: The connected unit cannot process signals with a scan frequency of 96 kHz or 88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz.

Off: The connected unit can process signals with a scan frequeny of 96 kHz or 88.2 kHz. Signals are output as 96 kHz or 88.2 kHz.

Dolby Digital, DTS, MPEG [Bitstream] [PCM]

Bitstream: The connected unit can decode the corresponding signal.

PCM: If the connected unit cannot decode the corresponding signal, the setting must be switched to [PCM]. Otherwise, strong noise can cause damage to hearing or loudspeakers.

Perform settings based on your audio system.

45