Panasonic DMR-ES20DEB manual Safety Precautions, Important Safety Warnings

Page 3

Safety Precautions

Important Safety Warnings

! The moulded three pin mains plug is supplied for your safety and convenience and must NOT be cut off.

!A 5 amp fuse is fitted in the mains plug. If the fuse has to be replaced, it must be of the same rating and

approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

To replace the fuse, open the fuse compartment with a screwdriver as shown and replace the fuse and the cover securely.

Fuse cover

1. Open the fuse

cover with a screwdriver.

2. Replace the

Fuse

(5 ampere)

fuse and close

 

or attach the

 

fuse cover.

 

! To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service engineer only.

! WARNING: To reduce the risk of fire, electric shock or product damage, do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

! Do not insert metal object into the slots or openings of the unit.

!This unit is not disconnected from a.c. mains while it remains connected

to a live mains outlet, even if it has been turned off.

! The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable.

!This unit is intended for use in moderate climates.

Caution

! Avoid exposing the unit to direct sunlight or other heat sources.

! Avoid sudden change in temperature or humidity, dew or condensation may form, causing malfunction.

! Dispose of batteries in accordance with the instructions given in this book.

! Place the unit on a flat, stable surface. Do not place heavy object on top of the unit. ! Your attention is drawn to the fact that recording of pre-recorded tapes or discs

or other published or broadcast materials may infringe copyright laws.

!This unit is designed for indoor use only.

! Do not use in area with strong magnetic fields, e.g. near transmitting antenna.

! This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

! Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation vents.

!Do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

Inside of product

!

Do not place sources of naked flames, such as lighted candles, on the unit.

 

!

Dispose of batteries in an environmentally friendly manner.

! This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not open covers and do not repair yourself.

Refer servicing to qualified personnel.

Back of product, see page 8

Care and Maintenance

! The cabinet can be wiped clean with a damp cloth, disconnect from mains before cleaning. Do not use detergent or solution containing benzol or petroleum.

3

Image 3
Contents Customer Care Centre Operating Instructions DVD RecorderSales and Support Information Direct Sales at Panasonic UKTable of Contents Fuse and close Or attach Fuse cover Safety PrecautionsImportant Safety Warnings Fuse cover Open the fuse Cover with a screwdriver ReplaceBefore You Start Product Introduction Inserting BatteriesRemote control Operating a television set Setting the remote controlSwitching to AV input on your Panasonic television set Child lockFront Access Rear PanelFront Connections Pin Scart Socket DisplayPin Scart Socket Information on the displayConnecting with a 21-pin Scart cable Follow the steps belowDisconnect AC mains from all units If the clock setting menu appears Setup with Q LinkSetup without Q Link Automatic Tuning Auto-SetupDVD-Recorder Connecting with Audio/Video cableConnecting with S Video cable DVD RecorderAerial Connecting to a Satellite ReceiverFollow the steps below AntennaConnecting with RF cable Aerial cable Auto-Setup with RF cable Aerial cable Automatic tuningAuto clock set was not possible due to a weak signal Press Press Return to exit the On Screen Display Checking the Settings after Auto-SetupPress Enter to finish this setting Removing Interference / Changing RF output channelInformation for Progressive-compatible televisions PAL Connecting a television with Component Video input socketsComponent Video OUT socket Progressive television pictureAudio cable Connecting to the AV3 input sockets e.g. CamcorderExternal devices White/LTV Guide Selecting the programme from Category in the TV Guide Selecting the programme from Prog. Type in the TV GuideDisc formats Handling DiscsBefore playback Discs recorded with PAL or Ntsc signalsPlayback and recording discs Playback discsPlayback Single-frame playback Slow-motion playbackFast forward/rewind Skipping chapters, titles or picturesPress Time Slip Delayed playbackSplitting a recording into chapters Press Create Chapter during playbackUse Direct Navigator or Return to exit the Menu screen Selecting a group using the tree structureMP3 playback CD MP3Displaying the picture properties Jpeg playbackRecording Displaying the available recording time TIMER-controlled recordingsOptions in the Timer Recording menu Recording modes and approximate recording times in hoursPress PROG/CHECK Check Checking, changing or deleting Timer RecordingsCHECKPROG/ Manual programming ReminderTimer Recording from analogue channels Timer Recording in the TV GuidePress Video Plus+ Programming recordings with Video Plus+Recording from an external device, e.g. a camera Timer recordings via external devices EXT LinkCreate and edit playlists Automatic selection of the recording modeChange the units default settings Functions Selection MenuEntering Text RAM -R -RWV +R SymbolsEdit Chapter View Editing Titles and Chapters with the SUB MenuDivide Title RAM Set up Protection, Cancel Protection RAMPartial Erase RAM Change Thumbnail RAM -R -RWV +RCombine Chapters RAM Playing back chaptersErase Chapter RAM Create Chapter RAMTo Others Creating a PlaylistSelect / Edit Playlists Enter Name Edit Playlists Press FunctionsCreate CopyCreate Chapter Edit ChapterAdd Chapter Move ChapterSelect the sub menu Menu navigation in the Setup menuProfile Name Inserting individual channels into the profileInserting all available channels into the profile Editing the profileTuning Manual Tuning Auto-Setup RestartTuning Add New DVB Service Tuning Signal QualityChanging the Name of the Television Station Change the letter usingTuning Download from TV Disc SettingsDigital Audio Output Picture SettingsSound Settings Seamless Play On OffDisplay Settings Connection SettingsProgressive To activate the automatic time correction function Others SettingClock setting Others ClockEPG Download in Standby On Off Others System UpdateSoftware Update in Standby On Off Software Update Search NowDisc Protection RAM Erase all titles RAMFormat Disc RAM -RWV -RWVR Auto-Play Select -R -RWV +R Disc ManagementDisplay menus Status displays Banner Mheg ServiceDTS Digital Theater Systems Status displaysInformations Displaying the informationBefore requesting service TIMER-controlled recording Setup menu No subtitlesHow can I cancel a Timer TIMER-controlled recording is notIndex Specifications