Sony SAT-B3 Changing the Default Data Service, Setting the Baud Rate, Select one of the following

Changing the Default Data Service

The titles of the data services may be different, based on the service being provided.

3 Select one of the following:

To Do This ...	Do This ...
Change the data service for the	Select the data service and then
current station only	select RETURN.
Change the data service for all	Select DEFAULT (then see
stations	“Changing the Default Data
	Service” below).
Change the baud rate for the	Select BAUD (then see “Setting
Digital Satellite Receiver’s wide	the Baud Rate” below).
band data port

Use the DEFAULT button to select a default data service for all stations that provide data services.

To change the data service for all stations:

1 Select DEFAULT from the Data Services screen.

2 Select a default data service.

LOW SPEED DATA
DATA 1		DATA 2	DATA 3	DEFAULT DATA	RETURN
	ü			DATA 4
				DATA 1	DEFAULT
DATA 5		DATA 6	DATA 7	DATA 2	BAUD
				DATA 8
				DATA 3	HELP
				DATA 4
				DATA 5

Setting the Baud Rate

The baud rates displayed may be different, depending on which data port is being used.

To set the baud rate for the Digital Satellite Receiver’s data port:

1 Select BAUD from the Data Services screen.

2 Select a baud rate for the data port.

LOW SPEED DATA
DATA 1	ü	DATA 2	DATA 3	DATA 4	RETURN
				SET BAUD RATE	DEFAULT
DATA 5		DATA 6	DATA 7	2400DATA 8	BAUD
				4800	HELP
				9600
				19200

62