Sylvania LD195SL8 A owner manual 5Attaching a Wall Mount Bracket sold separately, PC Connection

PREPARATION

[PC Connection]

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor.

e.g.)

VGA cable should be with ferrite core.

personal computer

The following signals can be displayed:

rear of this unit

VGA cable

mini-plug audio cable

Format	Resolution	V. Frequency	Format	Resolution	V. Frequency
VGA	640 x 480	60Hz	WXGA	1280 x 720	60Hz
SVGA	800 x 600	60Hz		1280 x 768	60Hz
WVGA	848 x 480	60Hz		1360 x 768	60Hz
XGA	1024 x 768	60Hz	BOIS	720 x 400	70Hz
			WXGA+	1440 x 900	60Hz
Other formats or non-standard signals will not be displayed correctly.

Note:

•Please purchase the VGA cable that has a ferrite core.

•The following operations may reduce noise.

-Attach a ferrite core to the AC power cord of your PC.

-Unplug the AC power cord and use the built-in battery of your PC.

5Attaching a Wall Mount Bracket (sold separately)

The following is a description of the method for attaching a wall mount to this unit. When performing this operation, refer to the manual accompanying the wall mount kit.

#CAUTION

•Any damage caused by incorrectly attempting to mount this unit is not covered under the terms of the manufacturers warranty.

•This unit may be used only with VM1b manufactured by SANUS SYSTEMS.

•Use with other wall mounts may result in instability causing possible injury.

You need the following wall mount kit for this unit. Flat panel TV wall mount

Model number: VM1b

For more information,

please visit SANUS SYSTEMS website at www.sanus.com

*1 indicates the position of the screw holes on this unit.

1

rear of this unit

12

EN

1Spread a thick and soft cloth over a table. Place the main unit face down onto it. Make sure not to damage the screen.

Note:

•Make sure to use a table which can support the weight of this unit and is larger than this unit.

•Make sure the table is in a stable location.

2Attach the monitor mount to this unit using the M4 screws included with the wall mount kit.

Note:

•Only use the screw holes indicated by 1 for mounting this unit.

•For instructions on how to attach the monitor mount, refer to the manual accompanying the wall mount kit.

3Attach this unit to the wall.

Note:

•Refer to the manual accompanying the wall mount kit when securing this unit to the wall.