Sylvania DCC1903 owner manual Automatic Clock Setting, Auto Clock CH, CH Search

AUTOMATIC CLOCK SETTING				Clock signal. Auto Clock Setting is not possible.
Make sure ...				Please use Manual Clock Setting on page 14.
• The TV/VCR is turned on.			Press the MENU button to exit the screen.
• Confirm the TV/VCR is receiving a RF (Radio			NOTE: During Auto Clock CH Search, the picture
Frequency) signal from either an antenna or cable			may be distorted. This is normal.
system connection using the ANT IN jack on the
rear of the TV/VCR.
				4 Enter the channel number that contains the
NOTE:
• If a cable converter box is being used, make sure it				Automatic Clock Setting Signal
			Press the MENU button on the
is powered on.
• You must use the TV/VCR remote control to per-			remote control.		– M E N U –
form the clock setting procedure.			Press the PLAY/K or STOP/L		PICTURE CONTROL
					TIMER PROGRAMMING
• If the TV/VCR is connected directly to a cable con-			button to select “SETTING		B SETTING CLOCK
					CHANNEL SET UP
			CLOCK”.		USER’S SET UP
verter box or satellite box, the local PBS station					V-CHIP SET UP
					CAPTION [OFF]
must be selected on the cable box itself, and the			Press the F.FWD/B button to enter		TIME SEARCH
					ZERO RETURN
TV/VCR must be set to the output channel of the			“SETTING CLOCK” menu.
cable converter box or satellite box (usually chan-			Press the STOP/L button to select		– SETTING CLOCK –
nel 3 or 4), to be able to set up or correct the clock			“AUTO CLOCK CH”.		AUTO CLOCK CH SEARCH
					AUTO CLOCK	[ON]
automatically			Press the F.FWD/B or REW/s		B AUTO CLOCK CH	[ 45]
					D.S.T.	[OFF]
					MANUAL CLOCK SET
			buttons until you locate Auto
1 Select “SETTING CLOCK”			Clock Set station number. See item
			3 above.
Press the MENU button on the
	– M E N U –		Press the MENU button to exit the screen.
remote control.
	TIMER PROGRAMMING
Press the PLAY/K or STOP/L but-	PICTURE CONTROL
	CHANNEL SET UP
	B SETTING CLOCK			5 Turn off the TV/VCR
	V-CHIP SET UP
ton to select “SETTING CLOCK”.	USER’S SET UP
	LANGUAGE [ENGLISH]		Once the TV/VCR is turned off , it will periodically
Press the F.FWD/B button to enter	ZERO RETURN
	CAPTION [OFF]
“SETTING CLOCK” menu.	TIME SEARCH		check and set the correct date and time.
2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the F.FWD/B button until	B AUTO CLOCK	[ON]
AUTO CLOCK [ON] appears.	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
	D.S.T.	[OFF]

3Begin “AUTO CLOCK CH SEARCH”

Press the STOP/L button to select “AUTO CLOCK

CH SEARCH”.

Press the F.FWD/B button.
• The TV/VCR is now searching	– SETTING CLOCK –
for the station which contain the	AUTO CLOCK	[ON]
auto clock set signal. The search	B AUTO CLOCK CH SEARCH
	AUTO CLOCK CH	[ 02 ]
for a signal may take up to 20	MANUAL CLOCK SET
	D.S.T.	[OFF]

seconds per channel.

•“_ _” appears at the lower left of the screen when the search has

ended.	– AUTO CLOCK CH SEARCH –
• Auto Clock station- write down	08	10	13

the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See item	_ _
4 below.
• If no number(s) appear on the TV screen, there are
no stations in your area which contain the Auto

- 15 - EN

9I03