Eiki LC-XS30, LC-XS25 owner manual Connecting the AC Power Cord,  Note, Projector side

Page 17

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of the type of power being supplied.

Connect the projector with all peripheral equipment before turning the projector on. (See pages 14-16 for connection.)

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

Note:

Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

Connect the AC power cord (supplied) to the projector.

NOTE ON THE POWER CORD

AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.

	Projector side		AC outlet side
		For the U..S..A.. and Canada	For Continental Europe	For the U..K..
		Ground
	To power cord	To the AC outlet.
	connector on your	To the AC outlet.	To the AC outlet.	To the AC outlet.
	connector on your	(120 V AC)	To the AC outlet.	To the AC outlet.
	projector.	(120 V AC)	(200 - 240 V AC)	(200 - 240 V AC)

17

Image 17

Contents Model LC-XS25 LC-XS30 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerSafety Instructions Moving the Projector Installing the Projector in Proper PositionAir Circulation Federal Communications Commission Notice ComplianceFront Part Names and FunctionsBack Bottom① Control Port Rear TerminalTop Control Remote Control Two AA size batteries Remote Control Battery InstallationOperating Range Positioning the Projector InstallationAdjustable Feet Cables used for connection Connecting to a ComputerNote Connecting to Video EquipmentConnecting to Component Video and RGB Scart Equipment Projector side Connecting the AC Power Cord Note Basic Operation Selected Input Source and Lamp ModeTurning On the Projector PIN Code Input Dialog BoxTurning Off the Projector Remote Control How to Operate the On-Screen MenuTop Control On-Screen MenuMenu Bar Keystone Correction Zoom and Focus AdjustmentAuto setup function Remote Control Operation Sound AdjustmentAuto SET button Timer buttonZoom buttons No Show buttonComputer Input Computer 1 Analog Computer 1 Digital Video Remote ControlInput Source Selection RGB Computer 1 Analog/Computer Direct OperationComputer 1 button Input Source Selection Rgbpc digital, Rgbav HdcpPC System Menu Computer System SelectionSelecting Computer System Manually Menu Operation Auto PC Adj Auto PC AdjustmentTo store adjustment parameters Manual PC Adjustment Mode free ResetTo clear adjusted data To store adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment True Screen Size AdjustmentNormal Custom WideFull Zoom button For zooming in and out the images Digital zoom +Digital zoom Input Source Selection Video, S-video Video InputSource Select Menu Video Video buttonRGB Scart Input Source Selection Component, RGB Scart 21-pinComputer 2 button Component button Auto Video System SelectionAV System Menu Video or S-video AV System Menu ComponentImage CinemaImage button Dynamic Standard User preset image in the Image Adjust Menu. pp.42-43 Tint ColorProgressive Noise reductionProvide the image at a normal video aspect ratio Setting SettingSetting Menu Language LanguageAuto Keystone Auto setupInput search  Display KeystoneBlue back Logo select Logo Logo and Logo PIN code lock settingsCapture Logo select CaptureLogo PIN code lock To Enter the Logo PIN codeCeiling Rear Power management Standby modeCeiling RearOn start Filter control NotePIN code lock Security Key lock and PIN code lock settingsKey lock Change the PIN code Change the PIN code lock settingLamp counter FanFilter counter Factory defaultFilter Instructions Maintenance and CareRecommendation Replacing the Filter CartridgeScroll counter Resetting the Filter CounterResetting the Scroll Counter Lamp replacement icon Note Lamp ReplacementReset the lamp replacement counter Order Replacement LampResetting the Lamp Counter Lamp Handling PrecautionsIndicator emits a red light Indicator is blinking redProjector is shut down and the Warning Temp Then check the matters belowCleaning the Projector Cabinet Cleaning the Lens CoverAppendix TroubleshootingSignal is input into DVI terminal. see Check the Input signal. Auto PC function can not work whenPower management function can not work while Freeze or No Show function is running. see pages 23,24Remote Control does not work Menu Tree PC AdjustInput SoundSystem Image Select Image Adjust Image Select Image Adjust ScreenSetting Projector is off. The AC power cord is unplugged Indicators and Projector ConditionProjector is operating normally Red OrangeProjector Condition Freq Compatible Computer SpecificationsKHz NotesTechnical Specifications Optional Parts AccessoriesCOMPONENT-VGA Cable AH-98771 SCART-VGA Cable AH-98881 Model NoTerminal Analog RGB Mini D-sub 15 pin Configurations of TerminalsControl Port Connector D-sub 9 pin Unit inch mm DimensionsPIN Code Number Memo Logo PIN Code Lock NoEiki International, Inc