Eiki LC-XS30, LC-XS25 owner manual Fan, Lamp counter

Page 55

Setting

Fan

This function provides the following alternatives in the cooling fans' operation after turning off the projector. (p.19)

L1 . . . normal operation

L2 . . . slower and lower-sound than the normal operation (L1), but it takes longer to cool the projector down.

Warning log

This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.

Note:

When the Factory default function is executed, all the warning log records will be deleted.

Lamp counter

This function is used to reset the lamp replacement counter. When replacing the projection lamp, reset the lamp replacement counter by using this function. See page 62 for operation.

Note:

Do not reset the Lamp replacement counter without implementation of lamp replacement. Be sure to

reset the Lamp replacement counter only after replacing the lamp.

Lamp replacement icon

This icon appears on the screen when the end of lamp life is reached.

Note:

This icon also appears at turning on and selecting input source.

55

Image 55

Contents Model LC-XS25 LC-XS30 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerSafety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector Federal Communications Commission Notice ComplianceBottom Part Names and FunctionsFront Back① Control Port Rear TerminalTop Control Remote Control Operating Range Remote Control Battery InstallationTwo AA size batteries Adjustable Feet InstallationPositioning the Projector Cables used for connection Connecting to a ComputerNote Connecting to Video EquipmentConnecting to Component Video and RGB Scart Equipment  Note Connecting the AC Power CordProjector side PIN Code Input Dialog Box Selected Input Source and Lamp ModeBasic Operation Turning On the ProjectorTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Top ControlMenu Bar Auto setup function Zoom and Focus AdjustmentKeystone Correction Remote Control Operation Sound AdjustmentNo Show button Timer buttonAuto SET button Zoom buttonsDirect Operation Computer 1 Analog Computer 1 Digital Video Remote ControlComputer Input Input Source Selection RGB Computer 1 Analog/ComputerComputer 1 button Input Source Selection Rgbpc digital, Rgbav HdcpSelecting Computer System Manually Computer System SelectionPC System Menu To store adjustment parameters Auto PC AdjustmentMenu Operation Auto PC Adj Manual PC Adjustment To store adjusted data ResetMode free To clear adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment Normal Screen Size AdjustmentTrue Full WideCustom Digital zoom For zooming in and out the images Digital zoom +Zoom button Video button Video InputInput Source Selection Video, S-video Source Select Menu VideoComputer 2 button Component button Input Source Selection Component, RGB Scart 21-pinRGB Scart AV System Menu Component Video System SelectionAuto AV System Menu Video or S-videoImage button Dynamic Standard CinemaImage User preset image in the Image Adjust Menu. pp.42-43 Tint ColorProgressive Noise reductionProvide the image at a normal video aspect ratio Language SettingSetting Setting Menu LanguageInput search  Auto setupAuto Keystone Blue back KeystoneDisplay Logo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureLogo PIN code lock To Enter the Logo PIN codeRear Standby modeCeiling Rear Power management CeilingOn start Filter control NoteKey lock Security Key lock and PIN code lock settingsPIN code lock Change the PIN code Change the PIN code lock settingLamp counter FanFilter counter Factory defaultFilter Instructions Maintenance and CareRecommendation Replacing the Filter CartridgeResetting the Scroll Counter Resetting the Filter CounterScroll counter Lamp replacement icon Note Lamp ReplacementReset the lamp replacement counter Order Replacement LampResetting the Lamp Counter Lamp Handling PrecautionsThen check the matters below Indicator is blinking redIndicator emits a red light Projector is shut down and the Warning TempCleaning the Projector Cabinet Cleaning the Lens CoverAppendix TroubleshootingShow function is running. see pages 23,24 Check the Input signal. Auto PC function can not work whenSignal is input into DVI terminal. see Power management function can not work while Freeze or NoRemote Control does not work Sound PC AdjustMenu Tree InputSystem Image Select Image Adjust Image Select Image Adjust ScreenSetting Red Orange Indicators and Projector ConditionProjector is off. The AC power cord is unplugged Projector is operating normallyProjector Condition Freq Compatible Computer SpecificationsKHz NotesTechnical Specifications Model No AccessoriesOptional Parts COMPONENT-VGA Cable AH-98771 SCART-VGA Cable AH-98881Control Port Connector D-sub 9 pin Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Unit inch mm DimensionsPIN Code Number Memo Logo PIN Code Lock NoEiki International, Inc