Eiki LC-XS30 Computer System Selection, Selecting Computer System Manually, PC System Menu

Page 27

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is shown on pages 73-74)

One of the following messages may appear when:

Auto The projector cannot recognize the connected signal conforming to the provided PC Systems. The message "Auto" is displayed on the PC System Menu icon and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required. (pp.29-30)

-----There is no signal input from computer. Check the connection between your computer and the projector. (See "Troubleshooting" on pages 65-67.)

Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1 ~ 5. (pp.29-30)

SVGA 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1 Press the MENU button to display the On-Screen Menu. Press the Point ◄► buttons to move the red frame pointer to the PC System Menu icon.

2 Press the Point ▲▼ buttons to move the red arrow pointer to the system that you want to set, and then press the SELECT button.

PC System Menu

The Auto PC Adjustment function operates to adjust the projector.

PC System Menu

The PC System Menu icon

Selected system is displayed.

Systems on this dialog box can be selected.

Custom Mode (1 ~ 5) set in the

PC Adjust Menu. (p.30)

27

Image 27

Contents Model LC-XS25 LC-XS30 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerSafety Instructions Installing the Projector in Proper Position Air CirculationMoving the Projector Federal Communications Commission Notice ComplianceBottom Part Names and FunctionsFront Back① Control Port Rear TerminalTop Control Remote Control Remote Control Battery Installation Operating RangeTwo AA size batteries Installation Adjustable FeetPositioning the Projector Cables used for connection Connecting to a ComputerNote Connecting to Video EquipmentConnecting to Component Video and RGB Scart Equipment Connecting the AC Power Cord  NoteProjector side PIN Code Input Dialog Box Selected Input Source and Lamp ModeBasic Operation Turning On the ProjectorTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Top ControlMenu Bar Zoom and Focus Adjustment Auto setup functionKeystone Correction Remote Control Operation Sound Adjustment No Show button Timer button Auto SET button Zoom buttonsDirect Operation Computer 1 Analog Computer 1 Digital Video Remote ControlComputer Input Input Source Selection RGB Computer 1 Analog/ComputerComputer 1 button Input Source Selection Rgbpc digital, Rgbav HdcpComputer System Selection Selecting Computer System ManuallyPC System Menu Auto PC Adjustment To store adjustment parametersMenu Operation Auto PC Adj Manual PC Adjustment To store adjusted data ResetMode free To clear adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment Screen Size Adjustment NormalTrue Wide FullCustom For zooming in and out the images Digital zoom + Digital zoomZoom button Video button Video InputInput Source Selection Video, S-video Source Select Menu VideoInput Source Selection Component, RGB Scart 21-pin Computer 2 button Component buttonRGB Scart AV System Menu Component Video System SelectionAuto AV System Menu Video or S-videoCinema Image button Dynamic StandardImage User preset image in the Image Adjust Menu. pp.42-43 Tint ColorProgressive Noise reductionProvide the image at a normal video aspect ratio Language SettingSetting Setting Menu LanguageAuto setup Input search Auto Keystone Keystone Blue backDisplay Logo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureLogo PIN code lock To Enter the Logo PIN codeRear Standby modeCeiling Rear Power management CeilingOn start Filter control NoteSecurity Key lock and PIN code lock settings Key lockPIN code lock Change the PIN code Change the PIN code lock settingLamp counter FanFilter counter Factory defaultFilter Instructions Maintenance and CareRecommendation Replacing the Filter CartridgeResetting the Filter Counter Resetting the Scroll CounterScroll counter Lamp replacement icon Note Lamp ReplacementReset the lamp replacement counter Order Replacement LampResetting the Lamp Counter Lamp Handling PrecautionsThen check the matters below Indicator is blinking redIndicator emits a red light Projector is shut down and the Warning TempCleaning the Projector Cabinet Cleaning the Lens CoverAppendix TroubleshootingShow function is running. see pages 23,24 Check the Input signal. Auto PC function can not work whenSignal is input into DVI terminal. see Power management function can not work while Freeze or NoRemote Control does not work Sound PC AdjustMenu Tree InputSystem Image Select Image Adjust Image Select Image Adjust ScreenSetting Red Orange Indicators and Projector ConditionProjector is off. The AC power cord is unplugged Projector is operating normallyProjector Condition Freq Compatible Computer SpecificationsKHz NotesTechnical Specifications Model No AccessoriesOptional Parts COMPONENT-VGA Cable AH-98771 SCART-VGA Cable AH-98881Configurations of Terminals Control Port Connector D-sub 9 pinTerminal Analog RGB Mini D-sub 15 pin Unit inch mm DimensionsPIN Code Number Memo Logo PIN Code Lock NoEiki International, Inc