Computer Input
Display area H
Adjust the horizontal area displayed by this projector. Press the Point ◄► buttons to decrease/increase the value.
Display area V
Adjust the vertical area displayed by this projector. Press the Point ◄► buttons to decrease/increase the value.
Reset
To reset the adjusted data, select Reset and press the SELECT button. The confirmation box appears and then select [Yes]. All adjustments return to their previous figures.
Mode free
To clear the stored data, move the red frame pointer to the Mode free item and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button.
Store
To store adjusted data, move the red frame pointer to the Store item and then press the SELECT button. Move the red arrow pointer to any of Mode 1 to 5 in which you want to store and then press the SELECT button.
Quit
Exit the PC Adjust Menu.
Note:
•Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.27).
•PC Adjust Menu cannot be selected when Computer 1(Digital) is selected in the Input Menu. (p.26)
M o v e t h e r e d f r a m e 
pointer to an item and press the SELECT button.
This Mode has stored parameters.
To clear adjusted data
Vacant Mode | Values of "Total dots", |
| "Horizontal", "Vertical", |
| "Display area H" and |
| "Display area V". |
To store adjusted data
Close this dialog box.
30