Eiki LC-XS25, LC-XS30 owner manual Note, Filter control

Setting

Filter control

You can replace the filter with this function. Press the SELECT button at Filter control to display a confi rmation box. To replace, press the SELECT button at “YES” and the electrically operated fi lter starts to scroll.

Note:

•Filter replacement icon and “Please wait ... ” message appear on the screen when the filter is being scrolled.

•The fi lter cannot be rewound.

•When the filter is replaced, the total accumulatedtime of the fi lter use is automatically set to 0.

Filter control

Move the red frame pointer to "filter control" and press the SELECT button.

Remote control
This projector provides two different remote control codes:	Remote control
the factory-set initial code (Code 1) and the secondary
code (Code 2). This switching function prevents remote
control interference when operating several projectors or
video equipment at the same time.
When operating the projector in "Code 2", both the
projector and the remote control must be switched to
"Code 2".

To change the code for the projector:

Select either "Code 1" or "Code 2" in this Setting Menu.

To change the code for the remote control:

Press and hold both the MENU and IMAGE buttons together for 5 seconds or more. After changing the code, make sure the remote control operates properly.

Note:

If the batteries are removed from the remote control for a long period of time, the remote control code will be reset.

Press and hold M E N U a n d IMAGE buttons for more than 5 seconds.

52