Compaq EK-SMCPO-UG. C01 Installing Two SIMMs into Second Controller, Insert Simm into connector

Second Controller Option 5-7

Installing Two SIMMs into Second Controller

1.Install two of the SIMM modules into the second controller (make sure all SIMM modules are of the same type) by aligning the connector pins and inserting the modules into the SIMM module connectors as shown in Figure 5-6.

Figure 5-6. Insert SIMM into connector

2.Ensure the SIMM is firmly seated and then gently pivot it toward the controller board until it snaps into place as shown in Figure 5-7.

Figure 5-7. Pivot SIMM down to seat