NOTE: If the storage window connection is lost when the cable is moved, reopen the
HSZ22 StorageWindow).
16.Once the second Virtual Disk has been created, close the StorageWorks window.
17.To complete
■Ensure all cables and connections to your server are in place
■Leave the RA3000 Rack Mount Storage System powered on
■Reboot the server
Refer to the Getting Started RAID Array 3000 Installation Guide for your host system to configure the virtual disks as communications LUNs.
Connecting to Your Dual Controller Storage System
1.Open the StorageWorks management utility.
2.Refer to the Getting Started RAID Array 3000 Installation Guide for your host system for instructions describing how to connect the RA3000 to your host system.
