Compaq EK-SMCPO-UG. C01 manual Remove standoffs from UPS and external fault connectors

3-12RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide

Figure 3-7 shows how to remove standoffs from the UPS and external fault connectors.

3000-49

Figure 3-7. Remove standoffs from UPS and external fault connectors

11.Align the connectors on the replacement EMU with the connector holes on the rear panel and replace the mounting studs to secure the board (Do not over-tighten).

12.Reconnect the two ribbon cables to the rear connectors on the EMU board.

13.Replace the side cover on the pedestal and secure it with the TORX- head screw on the front bezel of the pedestal.

14.Replace the door on the pedestal.