Compaq EK-SMCPO-UG. C01 manual Transfer drives from base to expansion pedestal

4-16RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide

16.Transfer the bottom three disk drives (slots 4, 5, and 6) from the base pedestal to the top three slot locations (slots 0, 1, and 2) in the expansion pedestal as shown in Figure 4–16.

ID = 8

ID = 9

ID = 10

ID = 11

ID = 8

ID = 9

ID = 10

Base Pedestal

ID = 8

ID = 9

ID = 10

ID = 11

ID = 12

ID = 13

ID = 14

Expansion Pedestal

3000-46

Figure 4-16. Transfer drives from base to expansion pedestal

17.Install the new drives in the remaining slots of each pedestal to complete the installation.

18.Power up the UPS and the two pedestals and then proceed to the Compaq StorageWorks RAID 3000 Configuration and Maintenance Guide to configure the expanded subsystem.