Eiki LC-XS30, LC-XS25 owner manual Wide, Full, Custom

Page 35

Computer Input

Wide

Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9.

Full

Provide the full screen image.

Custom

Adjust the screen scale and position manually with this function.

Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears.

Scale H/V	Adjust the Horizontal/Vertical screen
	scale.
H&V	When set to "On", the aspect ratio
	is fixed. The "Scale V" appears
	dimmed and becomes unavailable.
	Adjust the "Scale H", then the
	screen scale is automatically
Position H/V	modified based on the aspect ratio.
Position H/V	Adjust the Horizontal/Vertical screen
	position.
Common	Save the adjusted scale to all the
	inputs. Press the SELECT button at
	Common to display a confirmation
	box. To save the scale, press the
	SELECT button at "Yes", When
	Custom is selected, the saved scale
	is used.
Reset	Reset the all adjusted values. Press
	the SELECT button at Reset to
	display a confirmation box. To reset,
	press the SELECT button at "Yes".

Notes:

•When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears.

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Press the SELECT button at Common or Reset, to display a confirmation box.

35

Image 35

Contents Model LC-XS25 LC-XS30 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerSafety Instructions Moving the Projector Installing the Projector in Proper PositionAir Circulation Federal Communications Commission Notice ComplianceBottom Part Names and FunctionsFront Back① Control Port Rear TerminalTop Control Remote Control Two AA size batteries Remote Control Battery InstallationOperating Range Positioning the Projector InstallationAdjustable Feet Cables used for connection Connecting to a ComputerNote Connecting to Video EquipmentConnecting to Component Video and RGB Scart Equipment Projector side Connecting the AC Power Cord Note PIN Code Input Dialog Box Selected Input Source and Lamp ModeBasic Operation Turning On the ProjectorTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Top ControlMenu Bar Keystone Correction Zoom and Focus AdjustmentAuto setup function Remote Control Operation Sound AdjustmentNo Show button Timer buttonAuto SET button Zoom buttonsDirect Operation Computer 1 Analog Computer 1 Digital Video Remote ControlComputer Input Input Source Selection RGB Computer 1 Analog/ComputerComputer 1 button Input Source Selection Rgbpc digital, Rgbav HdcpPC System Menu Computer System SelectionSelecting Computer System Manually Menu Operation Auto PC Adj Auto PC AdjustmentTo store adjustment parameters Manual PC Adjustment To store adjusted data ResetMode free To clear adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment True Screen Size AdjustmentNormal Custom WideFull Zoom button For zooming in and out the images Digital zoom +Digital zoom Video button Video InputInput Source Selection Video, S-video Source Select Menu VideoRGB Scart Input Source Selection Component, RGB Scart 21-pinComputer 2 button Component button AV System Menu Component Video System SelectionAuto AV System Menu Video or S-videoImage CinemaImage button Dynamic Standard User preset image in the Image Adjust Menu. pp.42-43 Tint ColorProgressive Noise reductionProvide the image at a normal video aspect ratio Language SettingSetting Setting Menu LanguageAuto Keystone Auto setupInput search  Display KeystoneBlue back Logo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureLogo PIN code lock To Enter the Logo PIN codeRear Standby modeCeiling Rear Power management CeilingOn start Filter control NotePIN code lock Security Key lock and PIN code lock settingsKey lock Change the PIN code Change the PIN code lock settingLamp counter FanFilter counter Factory defaultFilter Instructions Maintenance and CareRecommendation Replacing the Filter CartridgeScroll counter Resetting the Filter CounterResetting the Scroll Counter Lamp replacement icon Note Lamp ReplacementReset the lamp replacement counter Order Replacement LampResetting the Lamp Counter Lamp Handling PrecautionsThen check the matters below Indicator is blinking redIndicator emits a red light Projector is shut down and the Warning TempCleaning the Projector Cabinet Cleaning the Lens CoverAppendix TroubleshootingShow function is running. see pages 23,24 Check the Input signal. Auto PC function can not work whenSignal is input into DVI terminal. see Power management function can not work while Freeze or NoRemote Control does not work Sound PC AdjustMenu Tree InputSystem Image Select Image Adjust Image Select Image Adjust ScreenSetting Red Orange Indicators and Projector ConditionProjector is off. The AC power cord is unplugged Projector is operating normallyProjector Condition Freq Compatible Computer SpecificationsKHz NotesTechnical Specifications Model No AccessoriesOptional Parts COMPONENT-VGA Cable AH-98771 SCART-VGA Cable AH-98881Terminal Analog RGB Mini D-sub 15 pin Configurations of TerminalsControl Port Connector D-sub 9 pin Unit inch mm DimensionsPIN Code Number Memo Logo PIN Code Lock NoEiki International, Inc