Minicom Advanced Systems 3000 manual LEDs, Led

Page 11

USER GUIDE

The figure below illustrates the Line Splitter / Line Splitter L ports.

Serial Download cable

	SYSTEM OUT
5VDC
TUNING	SYSTEM IN

Power

	System cable		System
connector to Broadcaster			cables to Receivers

Figure 9 Line Splitter

LEDs

The table below explains the functions of all the LEDs of the units in the system.

	Unit	LED	Function
	Transmitter / Broadcaster	Front panel - Green	Power indicator
			Green - Power indicator
			Yellow solid – unit is connected to
	Receiver / Receiver L	RJ45 System port. Green /	the system.
		RJ45 System port. Green /	Yellow blinking – Bi-directional
		Yellow	Yellow blinking – Bi-directional
		Yellow	RS232 communication (only
			RS232 communication (only
			possible with one Receiver /
			Receiver L at a time).
	Receiver DCL	RJ45 System port. Green /	Green - Power indicator
		RJ45 System port. Green /	Yellow blinking – unit is connected
		Yellow	Yellow blinking – unit is connected
		Yellow	to the system
			to the system
	Line Splitter / Line Splitter L	Rear panel - RJ45 System port.	Green - Power indicator
		Rear panel - RJ45 System port.	Yellow blinking – unit is connected
		Green / Yellow	Yellow blinking – unit is connected
		Green / Yellow	to the system
			to the system

10

Image 11

Contents DS Vision User Guide Table of Contents User Guide User guide feedback Technical precautionsWelcome TrademarksIntroduction FeaturesTransmitter / Broadcaster System componentsSystem overview Broadcaster Unit 8 port ReceiversReceiver side Mounting the Receivers Receiver DCLVesa standard screw holes Line SplittersLED LEDsDS Vision applications Tuning UnitLong cluster Twisted Pair wiring installation tips Pre-installation guidelinesBroadcaster/Transmitter cables DS Vision cablesBroadcaster/Transmitter connections Connecting the cablesReceiver DCL connections Receiver /Receiver L connectionsConnecting to the power supply Connecting CATx cablesConnecting the Broadcaster/Transmitter Connecting/cascading a Line Splitter/LTables Adjusting the picture qualitySaving and exiting DS Vision system managementConnecting the Serial Download cable Installing the Service utilityLanguage Com portAuto-detect TopologyAuto-detected topology CalloutsManual UpdateCheck Saving a Group Naming a portSaving a topology Saving a Group Deleting a GroupFrom the topology on the left hand side Selecting the ports to commandControlling the system Control of Receiver DCL monitors Sending commandsFrom the icons on the right hand side Selecting allSending/blocking Audio Sending/blocking a Serial commandSending/blocking a bi-directional Serial command Sending/blocking videoTo tune from the Receiver L/DCL or Line Splitter/L position To tune from the Transmitter/Broadcaster positionTest card Red, Green, Blue Tuning window from Line Splitter L positionRGB signals Remote TuningRemote tuning Select device web Gives an overview of the remote tuning ServiceUpgrading firmware Service windowVersion line Broadcaster’s Local Serial port ServiceDisplay Data Channel DDC hotkey Security window SecurityDDC Technical specificationsDimensions Regional Offices

Related manuals

Manual 33 pages 40.44 Kb